Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(sharon osborne hairstyles)
 
(Hi ha 43 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
We shall go to make our search, if I can call it so, for it is not search but knowing, and we seek confirmation only.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/9j7monlinezithromax">order zithromax no prescription</a> <a href="http://www.purevolume.com/2hksbuyvibramycin">vibramycin without rx</a>  Yes, Eeyore, and Ive brought you a present.   <a href="http://www.purevolume.com/t879cheaptopamax">tenormin 60 mg</a>  Im tired, she said, resting a hand on his shoulder.  For a long time they looked at the river beneath them, saying nothing, and the river said nothing too, for it felt very quiet and peaceful on this summer afternoon.  <a href="http://www.purevolume.com/agplcheaplipitor">discount lipitor online</a>  <a href="http://www.purevolume.com/mjpnordertopamax">tenormin in italy</a>  <a href="http://www.purevolume.com/oj40onlinelevaquin">levaquin tablets</a>
+
 
<a href="http://www.purevolume.com/646sbuycelebrex">buy tenormin in gb</a>  <a href="http://www.purevolume.com/rvdpcheapventolin">ventolin online</a>  Her doctor told her that within a few months, at most, she must die, for her heart is weakening.  <a href="http://www.purevolume.com/m5unonlinearimidex">order arimidex without rx</a> <a href="http://www.purevolume.com/qa8jonlineseroquel">order seroquel in france</a>  Leaving the engine idling in neutral, he got out of the front seat and opened the rear door. <a href="http://www.purevolume.com/lraiovernightcytotec">buy cytotec in france</a>  <a href="http://www.purevolume.com/zt5jcheapmobic">order mobic in sweden</a>  For some moments all were paralyzed with awe-but the urgency of the case soon restored them their presence of mind.  
+
== Introducció ==
<a href="http://www.purevolume.com/htexcheapproscar">order proscar mastercard</a>  <a href="http://www.purevolume.com/578lbuyglucophage">order glucophage in gb</a>  Naturally the great leaders of the State would not allow harm to come to an innocent citizen who worked hard and had no black marks on her zapiska.   <a href="http://www.purevolume.com/02shbuytopamax">cheap tenormin in denmark</a>  Then, very suddenly, thought, and shuddering terror, and earnest endeavor to comprehend my true state.   Jonathan and I have been working day and night since Professor Van Helsing saw us<a href="http://www.purevolume.com/hx34onlinebiaxin">buy biaxin in germany</a> <a href="http://www.purevolume.com/eacgonlinedesogen">buy desogen next day delivery</a>  <a href="http://www.purevolume.com/4na3orderestrace">order estrace mastercard</a>
+
 
<a href="http://www.purevolume.com/0ec6ordermobic">order mobic in canada</a> <a href="http://www.purevolume.com/yzeuovernightmotrin">buy motrin in germany</a>  Because Poetry and Hums arent things which you get, theyre things which get you.   <a href="http://www.purevolume.com/ueu5overnightlipitor">buy lipitor no prescription</a> <a href="http://www.purevolume.com/3fvpcheapminocin">discount minocin</a>  As he watched, a pair of eyes materialized from behind the electric light bulb<a href="http://www.purevolume.com/dim9cheapilosone">ilosone in france</a> <a href="http://www.purevolume.com/mrziovernightsuprax">cheap suprax in france</a>  I took from the seat my oak walking stick-which I always carry on my holiday excursions-and closed the door, pointing back to Munich, and said, Go home,Johann-Walpurgis nacht doesnt concern Englishmen.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/8an4onlinebactrim">buy bactrim in it</a> <a href="http://www.purevolume.com/74p1onlineseroquel">buy seroquel in germany</a>   I hope the modesty of my cuisine and my cellar will not prove a further imposition.   <a href="http://www.purevolume.com/m9e2buynizoral">order nizoral in sweden</a> But first we must have something to eatI at length hit upon the following expedient, which, simple as it may seem, was hailed by me, at the moment of discovery, as an invention fully equal to that of the telescope, the steam-engine, or the art of printing itself<a href="http://www.purevolume.com/ftcbovernightamoxil">order amoxil pills</a>  <a href="http://www.purevolume.com/4dqaovernightzyprexa">cheap zyprexa in germany</a>  <a href="http://www.purevolume.com/zr4kcheapclomid">clomid in europe</a>
+
 
<a href="http://www.purevolume.com/yu87orderbiaxin">buy biaxin</a> <a href="http://www.purevolume.com/44riorderflagyl">order flagyl online fast</a>  It sounds a childish trick, she looked penitently at Bond, but its really frightfully effective.  <a href="http://www.purevolume.com/yeoubuybactrim">buy bactrim in au</a> <a href="http://www.purevolume.com/ki40orderamoxil">order amoxil online</a>  Till, if it may be in His good time, this horror may have passed away from me. <a href="http://www.purevolume.com/lhiqordercelebrex">buy tenormin in au</a> <a href="http://www.purevolume.com/dd5oonlinesuprax">suprax no prescription</a>  This, explained Pooh and Piglet together, and Tigger smiled his happiest smile and said nothing.
+
  http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/xixgbuylexapro">cheap lexapro in se</a> <a href="http://www.purevolume.com/mrp4buypriligy">cheapest priligy online</a>  He took out his wide gunmetal cigarette-case and his black lighter and placed them on the green baize at his right elbow.  <a href="http://www.purevolume.com/x9toovernightvaltrex">valtrex in germany</a> It is interesting for me to see this new Bond.  She went away with the message, and, engrossed with our work, I clean forgot all about him.  <a href="http://www.purevolume.com/xv19onlineplavix">order plavix online overnight</a> <a href="http://www.purevolume.com/oecforderxenical">buy xenical without prescription</a>  <a href="http://www.purevolume.com/854scheapbuspar">order buspar in se</a>
+
 
<a href="http://www.purevolume.com/21asbuylipitor">cheap lipitor next day delivery</a>  <a href="http://www.purevolume.com/l0tjbuycytotec">cytotec in usa</a>  I dared not pause to look on her as I had on her sister, lest once more I should begin to be enthrall.   <a href="http://www.purevolume.com/vntdovernightcipro">cipro next day delivery</a> <a href="http://www.purevolume.com/y1ulcheapadvair">advair in se</a>  His request was that I would at once release him from the asylum and send him home. <a href="http://www.purevolume.com/f0qwonlinedeltasone">deltasone 100 mg</a> <a href="http://www.purevolume.com/2tm5orderzovirax">zovirax 80 mg</a>  She was irritated with his lack of respect for the quality of her employers.
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/5impcheapfamvir">order famvir online no prescription</a> <a href="http://www.purevolume.com/zpmibuyclomid">clomid in france</a>  Had she then to be killed, I could have done it with savage delight.  <a href="http://www.purevolume.com/cnqyonlineduphaston">duphaston without rx</a> He derives pleasure from even the most trivial occupations bringing his talent into play.  Well, it was not too late.  <a href="http://www.purevolume.com/y748buyvaltrex">buy valtrex in italy</a>  <a href="http://www.purevolume.com/drnrbuyalesse">cheapest alesse without a prescription</a>  <a href="http://www.purevolume.com/jusforderdeltasone">order deltasone pills</a>
+
 
<a href="http://www.purevolume.com/vfv1overnightbiaxin">cheap biaxin in au</a>  <a href="http://www.purevolume.com/5xuncheappremarin">premarin 80 mg</a>  She had been told to do this whatever the result.  <a href="http://www.purevolume.com/0e9tovernightbactrim">bactrim in europe</a> <a href="http://www.purevolume.com/zv7cordersuprax">order suprax without rx</a>  I can see a bird in it from here, said Pooh. <a href="http://www.purevolume.com/xztdorderalesse">buy alesse in se</a> <a href="http://www.purevolume.com/bkmvcheapsinequan">sinequan 70 mg</a>  With joy I hurried to the window, and saw drive into the yard two great leiter-wagons, each drawn by eight sturdy horses, and at the head of each pair a Slovak, with his wide hat, great nail-studded belt, dirty sheepskin, and high boots.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/yuc4overnightelavil">elavil in usa</a> <a href="http://www.purevolume.com/vd8lcheaptenormin">tenormin 60 mg</a>  Two possible Olympic champions among them, incidentally.   <a href="http://www.purevolume.com/t907onlineplavix">buy plavix mastercard</a> Bond could imagine the scene in the narrow cockpit, the big man holding on with one hand and wrenching at the controls with the other as he watched the needle of the altimeter dip down through the hundreds.  There had been little doubt in Bonds mind ever since the Spandau had opened up on them, and since, even before then, in Jamaica, where the attempts on him had not been half-hearted. <a href="http://www.purevolume.com/l6alcheappremarin">premarin 30 mg</a>  <a href="http://www.purevolume.com/sjm1buymotrin">buying motrin</a>  <a href="http://www.purevolume.com/mg2covernightglucophage">cheap glucophage in germany</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/6gx4overnightwellbutrin">cheap wellbutrin in uk</a>  <a href="http://www.purevolume.com/6hvvovernighttenormin">order tenormin next day delivery</a>  We took our lunch to Mulgrave Woods, Mrs.   <a href="http://www.purevolume.com/bf4hbuyzovirax">order zovirax in europe</a> <a href="http://www.purevolume.com/y63yonlinesuprax">suprax in uk</a>  Would you care for a book of tickets? <a href="http://www.purevolume.com/4ltvbuyarimidex">arimidex 30 mg</a> <a href="http://www.purevolume.com/e1qgovernightlexapro">cheap lexapro in europe</a>  Perhaps we better hadnt go underneath, Pooh.
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/83cxcheappremarin">premarin in it</a> <a href="http://www.purevolume.com/66lzovernightarimidex">cheap arimidex online no prescription</a>  Tiffany Case came running to him and they stood side by side and watched the flaming banner from the tall smoke-stack and listened to the mountains throw back the echo of the charging locomotive.   <a href="http://www.purevolume.com/7tgibuycymbalta">buy cymbalta in france</a> To keep down the weight, the cylinder holds only five cartridges.   Go on, said Rabbit in a loud whisper behind his paw. <a href="http://www.purevolume.com/xf93onlineamoxil">amoxil online overnight</a>  <a href="http://www.purevolume.com/r1rncheaplasix">cheapest lasix without a prescription</a>  <a href="http://www.purevolume.com/257gbuyelavil">purchase elavil cheap</a>
+
*'''Expansió''': 3 ràdios miniPCI
63qjsupp@gmail.com
+
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
# Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
  #    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
  #  according in how did you connect the cable to the miniPCI. Keep the
 +
#   power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
  do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
  add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
  :foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
  do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
  do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
  add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari