Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(New international version kindle)
 
(Hi ha 32 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
Any of you men bin to have a look?
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/t2kwovernightdesogen">cheap desogen uk</a> <a href="http://www.purevolume.com/gr4ocheapflagyl">where can i buy flagyl for fish</a>  You may have ten minutes and then you will be forcibly elected.   <a href="http://www.purevolume.com/7fr1overnightsporanox">buy online cheap sporanox</a>  She tore at the buttons of her white cotton blouse.  Vesper dug her fingers into his arm.  <a href="http://www.purevolume.com/kztkcheapbiaxin">biaxin filmtab 500 mg</a>  <a href="http://www.purevolume.com/g3ucorderminocin">buy minocin online uk</a>  <a href="http://www.purevolume.com/tp7kcheapcelebrex">retail cost celebrex</a>
+
 
<a href="http://www.purevolume.com/le2wbuysingulair">singulair online canada</a>  <a href="http://www.purevolume.com/2tsporderdesogen">cheap desogen</a>  He answered, I am closing the tomb so that the Un-Dead may not enter.   <a href="http://www.purevolume.com/7r2xorderlipitor">annual sales for lipitor</a> <a href="http://www.purevolume.com/0v30buysynthroid">075 mg synthroid</a>  He said gruffly, Now come on, Honey. <a href="http://www.purevolume.com/3193overnightmotrin">children motrin price</a>  <a href="http://www.purevolume.com/e881cheapflomax">buy flomax online no prescription</a>  At least two million pounds worth of diamonds are being smuggled out of Africa every year.  
+
== Introducció ==
<a href="http://www.purevolume.com/x0anovernightdiflucan">diflucan online uk</a>  <a href="http://www.purevolume.com/412aovernightventolin">cheap ventolin</a>  When I have returned you will be master of all the facts, and we can then better enter on our inquisition.   <a href="http://www.purevolume.com/wvx0onlinesynthroid">buy synthroid online cheap in germany</a>  Desperately Bond spread his feet and hands.   His voice broke a little, and he went on with a voice full of pity<a href="http://www.purevolume.com/7cj7cheaplevaquin">how much does levaquin cost without insurance</a> <a href="http://www.purevolume.com/u2f5cheapduphaston">buy duphaston online uk</a>  <a href="http://www.purevolume.com/0k3rovernightsynthroid">synthroid 60 mg</a>
+
 
<a href="http://www.purevolume.com/qadjovernightinderal">inderal la 60 mg half life</a> <a href="http://www.purevolume.com/osvrovernightkamagra">kamagra costa del sol</a>  Some feeble and ill-directed efforts resulted in complete failure on their part, and, of course, in total triumph on mine.   <a href="http://www.purevolume.com/wkhyorderdesogen">buy desogen online cheap in germany</a> <a href="http://www.purevolume.com/jds9overnightpremarin">price premarin</a>  And I wouldnt get far with the Stewards<a href="http://www.purevolume.com/4ky7buylexapro">20mg lexapro side effects</a> <a href="http://www.purevolume.com/5k2ionlineperiactin">can i buy periactin without prescription</a>  Bond turned his back on the table and moved off round the room, thinking of her, and occasionally glancing across at the straight, imperious little figure in the exciting Western uniform.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/oml2cheapsingulair">singulair 5 mg for adults</a> <a href="http://www.purevolume.com/a5nxovernightinderal">inderal 10 mg price</a>   If not watching all the time, frequently visit and see that flowers are as placed, very important, do not fail.   <a href="http://www.purevolume.com/jvhjonlineproscar">can i order proscar online</a> Several trees were uprooted and hoses from three municipal tank cars were washing down the boulevard and pavements.   Why not go along and have a look at the place and at him? <a href="http://www.purevolume.com/56ytovernightflagyl">flagyl 250 mg tabletas</a> <a href="http://www.purevolume.com/fc0donlinecelebrex">online celebrex</a>  <a href="http://www.purevolume.com/dpvtonlinekamagra">kamagra oral jelly price india</a>
+
 
<a href="http://www.purevolume.com/nwgpcheaplexapro">can lexapro 10 mg get you high</a> <a href="http://www.purevolume.com/sz33buyarimidex">cheap arimidex uk overnight</a>  He smiled, such a soft, smooth, diabolical smile that I knew there was some trick behind his smoothness.   <a href="http://www.purevolume.com/sgt8onlineminocin">buy minocin medication cod</a> <a href="http://www.purevolume.com/bponcheapstromectol">purchase discount stromectol</a>  That will mean that he is not engaged on some operation. <a href="http://www.purevolume.com/jq8tcheaptopamax">buy topamax discount</a> <a href="http://www.purevolume.com/kg8cbuycipro">cipro 500 mg tablet</a>  The barman produced a corked bottle of water and put it beside Bonds Old Grandad.
+
  http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/d60kcheapvibramycin">overnight vibramycin ups</a> <a href="http://www.purevolume.com/99wucheapsynthroid">buy online synthroid</a>  Any of you would have done the same.  <a href="http://www.purevolume.com/71pzordersynthroid">buy brand name synthroid</a> He stood upright, holding her slung over his shoulder by one leg.  The history of human knowledge has so uninterruptedly shown that to collateral, or incidental, or accidental events we are indebted for the most numerous and most valuable discoveries, that it has at length become necessary, in any prospective view of improvement, to make not only large, but the largest allowances for inventions that shall arise by chance, and quite out of the range of ordinary expectation.  <a href="http://www.purevolume.com/b2l0overnightbuspar">how much does buspar cost</a> <a href="http://www.purevolume.com/6fvscheapfamvir">purchase famvir cheap</a>  <a href="http://www.purevolume.com/icnhorderglucophage">pharmacy glucophage</a>
+
 
<a href="http://www.purevolume.com/71w3cheapzithromax">zithromax 3 day</a>  <a href="http://www.purevolume.com/qozjonlineglucophage">buy glucophage discount</a>  He hooked a chair out with his foot and sat her down beside him, keeping the grip on her wrist behind her back.   <a href="http://www.purevolume.com/taulordervaltrex">buy valtrex no prescription</a> <a href="http://www.purevolume.com/7oxdorderzyprexa">zyprexa 20mg</a>  He had crossed the river with her in an open ferry-boat. <a href="http://www.purevolume.com/a3cacheapdeltasone">purchase cheap deltasone 10mg online</a> <a href="http://www.purevolume.com/cp6jorderbactrim">bactrim in pregnancy</a>  The tiny field of hairs bent gently.
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/c7ikbuyelavil">side effects of elavil 100 mg</a> <a href="http://www.purevolume.com/zabponlinewellbutrin">buy wellbutrin india</a>  How good and thoughtful he is.   <a href="http://www.purevolume.com/bnoebuyplavix">buy plavix discount</a> As everywhere in Russia, a car meant an official, and an official could only mean danger.  This consideration might be supposed to operate upon him now-at this late period-since it has been given in evidence that he was seen with Marie-but it would have had no force at the period of the deed.  <a href="http://www.purevolume.com/etxhcheapinderal">inderal 240 mg</a> <a href="http://www.purevolume.com/928lcheaparcoxia">arcoxia cost</a>  <a href="http://www.purevolume.com/c7shovernightcipro">cipro xr 500mg dosage</a>
+
 
<a href="http://www.purevolume.com/1vkybuyfamvir">online purchase famvir</a>  <a href="http://www.purevolume.com/1xg8buyvaltrex">valtrex cost planned parenthood</a>  As we passed along, the gravel hurt my feet, and Lucy noticed me wince.   <a href="http://www.purevolume.com/07gqonlinekamagra">kamagra sales uk</a> <a href="http://www.purevolume.com/mcgycheapminocin">minocin price ireland</a>  There was a row of dials and switches on the instrument panel.  <a href="http://www.purevolume.com/2edtbuyclomid">buy clomid for men uk</a> <a href="http://www.purevolume.com/bys9buylipitor">lipitor mg</a>  The man beside him pulled the lever sharply upwards.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/9ibeorderlevaquin">buy levaquin in mexico</a> <a href="http://www.purevolume.com/af59onlinenexium">nexium online canada</a>  Then I am with you heart and soul.  <a href="http://www.purevolume.com/mzfvonlineclomid">buy clomid without rx</a> The serious problem is the shortage of executioners.  From the manner of gathering up a trick he judges whether the person taking it can make another in the suit.  <a href="http://www.purevolume.com/k3czovernightnizoral">salep nizoral cream</a> <a href="http://www.purevolume.com/my1icheaplevaquin">online levaquin</a>  <a href="http://www.purevolume.com/cs1mbuycymbalta">walmart pharmacy price for cymbalta</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/8nbdonlinekamagra">kamagra online uk next day delivery</a>  <a href="http://www.purevolume.com/xcv3overnightnolvadex">cheap nolvadex</a>  It was on this morning that Owl came flying over the water to say How do you do?  <a href="http://www.purevolume.com/n5nxbuystrattera">buy generic strattera online</a>  <a href="http://www.purevolume.com/8k3ronlinevibramycin">vibramycin purchase</a>  As to the tall, curly-haired man, I suppose it was the one who was with me at the last Pop.  <a href="http://www.purevolume.com/grogordersinequan">buy sinequan online australia</a> <a href="http://www.purevolume.com/0f1xbuycelebrex">800 mg celebrex</a>  And it might have been for this reason only, that, when I again uplifted my eyes to the house itself, from its image in the pool, there grew in my mind a strange fancy - a fancy so ridiculous, indeed, that I but mention it to show the vivid force of the sensations which oppressed me.
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/cmuworderpriligy">buy priligy tablets</a> <a href="http://www.purevolume.com/yds7onlinecytotec">discount cytotec online in australia</a>  Perhaps we could decide when Ive put in my final report.   <a href="http://www.purevolume.com/ifvbovernightpremarin">generic premarin cream price</a> But the heart beat on, strongly and regularly inside the tortured envelope, and the healing sorceries of oxygen and rest pumped life back into the arteries and veins and recharged the nerves.   I sent for you, said he, in a grandiloquent tone, when I had completed my examination of the beetle, I sent for you, that I might have your counsel and assistance in furthering the views of Fate and of the bug- My dear Legrand, I cried, interrupting him, you are certainly unwell, and had better use some little precautions. <a href="http://www.purevolume.com/4eckbuyflagyl">flagyl 0 5 100 ml</a>  <a href="http://www.purevolume.com/sgmucheapalesse">alesse cost</a>  <a href="http://www.purevolume.com/vweforderdesogen">order desogen</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
# Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
#    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
  #    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
  #   power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#  (the script reconfigures some IP addresses, so communication can be lost)
 +
  # -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#   to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
  #  the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
  :foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
  # Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
  :foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari