Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(window.onclose javascript)
 
(Hi ha 16 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
Whereat she laughed, a laugh low and unreal, and said, Fear for me!
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/0b97buysuprax">suprax antibiotics</a>  <a href="http://www.purevolume.com/b7qbbuypropecia">buy propecia pills</a>  I could bear those hypocritical smiles no longer!  <a href="http://www.purevolume.com/s4nvordermobic">buy liquid meloxicam</a>  Ive heard something like it, said Alice.   I got something different, he said.  <a href="http://www.purevolume.com/7oy6buycelebrex">que es celebrex 200 mg</a>  <a href="http://www.purevolume.com/goa1cheappriligy">where can i buy priligy in malaysia</a>  <a href="http://www.purevolume.com/bzxmbuyclomid">clomiphene citrate 50 mg buy online</a>
+
 
<a href="http://www.purevolume.com/3znbcheaptopamax">100mg topamax weight loss</a>  <a href="http://www.purevolume.com/t3pyovernightperiactin">buy periactin online no prescription</a>  Lucy seems more restful than she has been for some time, and fell asleep at once.   <a href="http://www.purevolume.com/clslovernightalesse">buy on line alesse cheap</a>  <a href="http://www.purevolume.com/mlcqorderclomid">bought clomid online get pregnant</a>  No, I didnt, said Alice: I dont think its at all a pity<a href="http://www.purevolume.com/cw09cheapsynthroid">cheapest synthroid without a prescription</a> <a href="http://www.purevolume.com/e4nlonlineplavix">buying plavix without a script</a>  And did you not hear me swear promise to her, that so she closed her eyes grateful?
+
== Introducció ==
<a href="http://www.purevolume.com/vh5echeapsinequan">sinequan 4mg</a> <a href="http://www.purevolume.com/hx34onlinebiaxin">what is biaxin filmtab 500mg used for</a>  The moons actual distance from the earth was the first thing to be attended to.   <a href="http://www.purevolume.com/kq8dovernightlasix">lasix 240 mg</a> Instead he explored his present physical sensations.  At the far end of the state room, with his back to a small open fireplace flanked by bookshelves gleaming richly with gold tooled leather bindings, stood Mr Spang, In a red leather armchair near a small writing-desk half way down the car Tiffany Case sat bolt upright. <a href="http://www.purevolume.com/jda4buytenormin">cost of tenormin</a>  <a href="http://www.purevolume.com/bd49onlinelasix">para que es el lasix 40 mg</a>  <a href="http://www.purevolume.com/mjihonlinelevaquin">levaquin annual sales</a>
+
 
<a href="http://www.purevolume.com/hcvjovernightamoxil">amoxil 500 mg price</a> <a href="http://www.purevolume.com/b9ccovernightpriligy">priligy costa rica</a>  Come in, said Dupin, in a cheerful and hearty tone.   <a href="http://www.purevolume.com/wmvqbuylexapro">lexapro sale online</a> <a href="http://www.purevolume.com/sploorderzithromax">zithromax for sale</a>  Now there was no preoccupation in his face<a href="http://www.purevolume.com/8egtcheapestrace">buy estrace online purchase</a> <a href="http://www.purevolume.com/p46bonlinefamvir">for sale famvir</a>  There was a loud cracking noise.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/2fyocheapduphaston">buy duphaston online uk</a> <a href="http://www.purevolume.com/vfloonlinedeltasone">purchase generic deltasone 40mg online no prescription required</a>  They drove for a quarter of an hour up to Halfway Tree and then on to the Junction Road, the main road across the island.   <a href="http://www.purevolume.com/ukyyordertenormin">tenormin 25</a> He thought how wonderful it was to be away from headquarters, and from London, and from hospitals, and to be here, at this moment, doing what he was doing and knowing, as all his senses told him, that he was on a good tough case againMy good Friend, When I received your letter I am already coming to you<a href="http://www.purevolume.com/db3xcheapnolvadex">10 mg nolvadex on cycle</a> <a href="http://www.purevolume.com/5k2ionlineperiactin">periactin mg</a>  <a href="http://www.purevolume.com/wfaoonlineduphaston">cheap duphaston no rx</a>
+
 
<a href="http://www.purevolume.com/s56bovernightmotrin">where can i buy motrin</a> <a href="http://www.purevolume.com/bsw0ordersingulair">generic singulair without prescription</a>  At the end of a week, however, she re-appeared at her customary comptoir, as well as ever, with the exception of a slight paleness not altogether usual.  <a href="http://www.purevolume.com/yw7kbuyzyprexa">order zyprexa online</a> <a href="http://www.purevolume.com/1gbnovernightstromectol">buy stromectol without prescription</a>  I know what sorrows you have had, though I cannot measure the depth of them. <a href="http://www.purevolume.com/nkw5buysinequan">sinequan paypal</a> <a href="http://www.purevolume.com/rhnbbuyvaltrex">valtrex price australia</a>  Good rider but not above this sort of caper if the moneys right and hes in the clear.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/acriovernightventolin">ventolin overnight us pharmacy</a> <a href="http://www.purevolume.com/3ng8buyvibramycin">vibramycin capsules 100mg</a>  Why then, as I perused them, did the hairs of my head erect themselves on end, and the blood of my body become congealed within my veins?  <a href="http://www.purevolume.com/0390cheapminocin">minocin iv price</a> He turned Bond round to the light and unwound the flex from his wrists.  I do remember, he said, only Pooh doesnt very well, so thats why he likes having it told to him again<a href="http://www.purevolume.com/2cqponlinefamvir">overnight famvir ups</a> <a href="http://www.purevolume.com/k1glbuymobic">price of mobic</a>  <a href="http://www.purevolume.com/b2i5buyduphaston">buy duphaston</a>
+
 
<a href="http://www.purevolume.com/85j3overnightcymbalta">cymbalta 90 mg for depression</a>  <a href="http://www.purevolume.com/hen8buypremarin">premarin 0 3 mg tablets</a>  Now, in the Intelligence School for Foreigners outside Leningrad, squashed tightly among the ranks of Germans, Czechs, Poles, Baits, Chinese and Negroes, all with serious dedicated faces and pens that raced across their notebooks, he struggled with subjects that were pure double-dutch to him.  <a href="http://www.purevolume.com/iy6nbuytopamax">400 mg topamax binge eating</a> <a href="http://www.purevolume.com/n592onlineinderal">inderal costo</a>  It slowly swings itself around until its prow points toward the sun. <a href="http://www.purevolume.com/qct3onlineamoxil">amoxil 500</a> <a href="http://www.purevolume.com/2m26cheapclomid">best place to buy clomid</a>  This was a big assignment which so far had gone well.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/cqvgorderdeltasone">purchase cheapest generic deltasone no prescription required</a> <a href="http://www.purevolume.com/4dqaovernightzyprexa">zyprexa purchase</a>  A sombre, yet beautiful and peaceful gloom here pervaded all things.  <a href="http://www.purevolume.com/mykrovernightcymbalta">purchase cymbalta overnight</a>  This was the depopulated village of centuries ago.   Just as I had come to this conclusion I heard a heavy step approaching behind the great door, and saw through the chinks the gleam of a coming light<a href="http://www.purevolume.com/s7richeapmobic">purchase mobic airmail</a> <a href="http://www.purevolume.com/uctwovernightsingulair">price singulair 10mg</a>  <a href="http://www.purevolume.com/wf7wovernightdeltasone">purchase cheap deltasone 20mg with no prescription</a>
+
 
<a href="http://www.purevolume.com/vhcgcheaplevaquin">levaquin 500mg uses</a> <a href="http://www.purevolume.com/pa9abuypremarin">premarin on line without prescription</a>  Hed certainly give something for M to be sharing it with him now.  <a href="http://www.purevolume.com/kulzonlinefamvir">best buy for famvir</a> <a href="http://www.purevolume.com/h75rcheapstromectol">stromectol side effect</a>  Berenice and I were cousins, and we grew up together in my paternal halls. <a href="http://www.purevolume.com/ialhovernighttenormin">tenormin 50 mg tab</a>  <a href="http://www.purevolume.com/dw2honlinestrattera">80 mg strattera side effects</a>  It meandered into a dying moan.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/2mmcorderarimidex">buy arimidex in australia</a> <a href="http://www.purevolume.com/dhf8ordercelebrex">celebrex 400 mg dose</a>  Christopher Robin came down from the Forest to the bridge, feeling all sunny and careless, and just as if twice nineteen didnt matter a bit, as it didnt on such a happy afternoon, and he thought that if he stood on the bottom rail of the bridge, and leant over, and watched the river slipping slowly away beneath him, then he would suddenly know everything that there was to be known, and he would be able to tell Pooh, who wasnt quite sure about some of it.  <a href="http://www.purevolume.com/wsjlovernightcytotec">costo del cytotec en mexico</a>  It proved to be a small pamphlet treatise on Speculative Astronomy, written either by Professor Encke of Berlin or by a Frenchman of somewhat similar name.   The sunlight dappled down through the thick roof of leaves. <a href="http://www.purevolume.com/ce1ibuysynthroid">cheap generic synthroid</a> <a href="http://www.purevolume.com/zzuvcheapdeltasone">order cheap generic deltasone 10mg no prescription</a>  <a href="http://www.purevolume.com/brmmonlinexenical">buy xenical online nz</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/vuniorderminocin">order minocin</a> <a href="http://www.purevolume.com/o6dmbuyinderal">order inderal cheap</a>  This is important in case there is a subsequent investigation.  <a href="http://www.purevolume.com/1eq4buylasix">80 mg lasix iv</a> <a href="http://www.purevolume.com/bitdorderxenical">order xenical no prescription</a>  Fortunately, each time I awoke in time and managed to undress her without waking her, and got her back to bed. <a href="http://www.purevolume.com/kc43ordervibramycin">vibramycin without prescription</a>  <a href="http://www.purevolume.com/uik5buynolvadex">where can i buy nolvadex in south africa</a>  She looked like a girl in a mans pyjamas.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/5c2ybuylevaquin">pharmacy levaquin</a> <a href="http://www.purevolume.com/h6xqbuypriligy">priligy sales in singapore</a>  Seward has told me of you.  <a href="http://www.purevolume.com/h44covernightdesogen">desogen dosage</a>  Again in fancy I behold thee Once more thy form hath risen before me-not-oh not as thou art-in the cold valley and shadow-but as thou shouldst be-squandering away a life of magnificent meditation in that city of dim visions, thine own Venice-which is a star-beloved Elysium of the sea, and the wide windows of whose Palladian palaces look down with a deep and bitter meaning upon the secrets of her silent waters.  It turned into a pig, Alice quietly said, just as if it had come back in a natural way<a href="http://www.purevolume.com/dkj3orderzyprexa">buying zyprexa</a>  <a href="http://www.purevolume.com/ulzoorderlipitor">lipitor 10 mg dose</a>  <a href="http://www.purevolume.com/dtnvcheapvibramycin">buy vibramycin 100mg</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
  #
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
#    a.Winbox (with Linux, wine required)
 +
  #    b.Terminal (telnet, ssh...)
 +
  #    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
  #    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
  # -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
  # -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
  :foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
  # Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
  :foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
  :foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
  /ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
  / routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
  /  
 +
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari