Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(3 reel slot machines)
 
(Hi ha 12 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
−
A pause, a bang of the hammer, a look of sincere reproach towards the ringside seats where the big money sat.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
−
<a href="http://www.purevolume.com/syaxovernightnexium">nexium samples online</a>  <a href="http://www.purevolume.com/21hycheapsingulair">buy cheap singulair online</a>  We went round to the back of the house, where there was a kitchen window.   <a href="http://www.purevolume.com/8i52orderinderal">cheapest inderal without a prescription</a>  The driver again took his seat, and shaking his reins, started off at a great pace.   Over a glass of wine I warmly thanked him and his brave comrades for saving me.  <a href="http://www.purevolume.com/71zxcheapkamagra">cheapest kamagra oral jelly</a>  <a href="http://www.purevolume.com/aqu8orderarcoxia">arcoxia to buy</a>  <a href="http://www.purevolume.com/zb6dorderlipitor">lipitor 20 mg tablet side effects</a>
+
 
−
<a href="http://www.purevolume.com/53vtcheapsporanox">purchase sporanox</a>  <a href="http://www.purevolume.com/kq8dovernightlasix">lasix ret 60 mg</a>  While he ate and talked, he edged the big steel meat knife towards him.   <a href="http://www.purevolume.com/6p07cheapfamvir">cost of famvir</a> <a href="http://www.purevolume.com/tfhvonlinekamagra">cheap kamagra uk paypal</a>  Pooh, promise you wont forget about me, ever.  <a href="http://www.purevolume.com/e6rcbuyzithromax">zithromax price in india</a> <a href="http://www.purevolume.com/p4lrbuyzovirax">zovirax price boots</a>  The frowning mountains seemed further away, and we were near the top of a steep rising hill, on summit of which was such a castle as Jonathan tell of in his diary.  
+
== Introducció ==
−
<a href="http://www.purevolume.com/g78xorderilosone">ilosone 500</a> <a href="http://www.purevolume.com/9ms9overnightstromectol">stromectol paypal</a>  The Professor and I sawed the top off the stake, leaving the point of it in the body.  <a href="http://www.purevolume.com/ui0lonlinepropecia">propecia purchase canada</a> Bond would pray report that afternoon, at 2.  And a brute beast - whose fellow I had contemptuously destroyed - a brute beast to work out for me - for me, a man, fashioned in the image of the High God - so much of insufferable woe! <a href="http://www.purevolume.com/634cbuykamagra">buy kamagra from uk</a> <a href="http://www.purevolume.com/6veyonlineperiactin">periactin dosing</a>  <a href="http://www.purevolume.com/8ql3ordercymbalta">what is cymbalta 60 mg used for</a>
+
 
−
<a href="http://www.purevolume.com/wfddonlinemobic">mobic 7 5 mg used</a> <a href="http://www.purevolume.com/yl59overnightzyprexa">order zyprexa</a>  Being both, apparently, occupied with thought, neither of us had spoken a syllable for fifteen minutes at least.  <a href="http://www.purevolume.com/jw85orderamoxil">amoxil 400 mg for dogs</a> <a href="http://www.purevolume.com/zjwgcheapkamagra">buy kamagra in nottingham</a>  What we call death, is but the painful metamorphosis. <a href="http://www.purevolume.com/txuponlinesynthroid">synthroid 25 mg price</a> <a href="http://www.purevolume.com/3e3eorderminocin">minocin for sale</a>  I was too much exhausted to reflect upon this circumstance, but ate and drank with avidity.
+
Les característiques es poden trobar a la web de microtik:
−
<a href="http://www.purevolume.com/tov0onlinecipro">ci cipro 55 for sale</a> <a href="http://www.purevolume.com/sxi6cheapbuspar">buspar 10 10 mg 30 comprimidos</a>  Maybe I havent looked hard enough or in the right places.  <a href="http://www.purevolume.com/bkttovernightpremarin">lowest cost premarin</a> We can continue our conversation in more intimate surroundings.  She waited for some time without hearing anything more: at last came a rumbling of little cartwheels, and the sound of a good many voice all talking together: she made out the words: Wheres the other ladder? <a href="http://www.purevolume.com/j4v4buypremarin">cheap premarin</a> <a href="http://www.purevolume.com/2nqtonlinecipro">ciprofloxacin hcl 500mg expiration</a>  <a href="http://www.purevolume.com/r8r8ordersuprax">suprax 100 mg</a>
+
 
−
<a href="http://www.purevolume.com/0wtyovernightcytotec">cytotec with no prescription</a> <a href="http://www.purevolume.com/xz0ccheapsingulair">singulair 5mg chewable side effects</a>  And it says, Did he blinch no no.  <a href="http://www.purevolume.com/5p0tonlinezithromax">buy zithromax for chlamydia</a>  <a href="http://www.purevolume.com/qz03cheaparimidex">arimidex 1 mg in india</a>  Almost before the words were out of her mouth, and as if to comment on them, the little engine gave a deprecating cough. <a href="http://www.purevolume.com/9snionlineduphaston">duphaston buy online cheap</a> <a href="http://www.purevolume.com/j2f1cheapnizoral">buy nizoral shampoo walgreens</a>  There was no hint in his movements that this would be his last stake.
+
http://www.routerboard.com/comparison.html
−
<a href="http://www.purevolume.com/18reonlinesingulair">buy singulair 4 mg granules</a> <a href="http://www.purevolume.com/i220onlinebuspar">7 5 mg buspar</a>  It was this last one near the winning post whose eye would see and record all that happened at the final bend.  <a href="http://www.purevolume.com/dpvtonlinekamagra">buy kamagra paypal uk</a> This thirst it appeared to be the design of my persecutors to stimulate: for the food in the dish was meat pungently seasoned.  The then only hope, thought Bond, was to stamp on him now.  <a href="http://www.purevolume.com/lf6ebuylasix">lasix purchase canada</a> <a href="http://www.purevolume.com/qh7lcheaptenormin">tenormin anxiety</a>  <a href="http://www.purevolume.com/gwfeovernightbuspar">purchase buspar airmail</a>
+
 
−
<a href="http://www.purevolume.com/89evorderarcoxia">cat costa o cutie de arcoxia</a> <a href="http://www.purevolume.com/hw82onlinebuspar">cheapest buspar without a prescription</a>  Have some wine, the March Hare said in an encouraging tone.  <a href="http://www.purevolume.com/elvmbuyarimidex">order arimidex discount</a>  <a href="http://www.purevolume.com/agb0buylasix">order lasix overnight delivery</a>  Bond picked up each in turn, hefting them in his hand.  <a href="http://www.purevolume.com/ksydbuycymbalta">60 mg cymbalta side effects</a>  <a href="http://www.purevolume.com/w5igonlinezyprexa">zyprexa 15mg</a>  What was the name of the man who took it?
+
Feu clic a la fletxa cap avall on posa '''More'''
−
<a href="http://www.purevolume.com/ppo8ordersporanox">sporanox 10mg ml oral solution</a> <a href="http://www.purevolume.com/qjwjorderlasix">lasix overnight</a>  Minutely and sagaciously directing the various modes of investment, he bequeathed the aggregate amount to the nearest of blood, bearing the name of Ellison, who should be alive at the end of the hundred years.  <a href="http://www.purevolume.com/g6v1orderventolin">order ventolin online</a> But we are both bearing it wonderfully.  I had just enough money to subscribe to it and I began looking for the shells that people said they wanted in the advertisements. <a href="http://www.purevolume.com/mdcvonlinevaltrex">order generic valtrex online</a> <a href="http://www.purevolume.com/7jesorderalesse">get alesse without a prescription</a>  <a href="http://www.purevolume.com/p57povernightsporanox">i want to order sporanox without a perscription</a>
+
 
−
<a href="http://www.purevolume.com/0lvuovernightkamagra">kamagra sildenafil 100mg erfahrung</a> <a href="http://www.purevolume.com/9supbuyzovirax">zovirax eye ointment buy</a>  One day, and he accepted the fact he would be brought to his knees by love or by luck.  <a href="http://www.purevolume.com/7jq8overnightadvair">advair coupons</a>  <a href="http://www.purevolume.com/fkrronlineperiactin">cheapest periactin online</a>  At night I hear her gasping as if for air. <a href="http://www.purevolume.com/xx1obuyclomid">buy clomiphene</a> <a href="http://www.purevolume.com/a4ckcheaptenormin">buy tenormin online</a>  It is true that balloons, in the first stage of their ascensions from the earth, are known to rise with a velocity comparatively moderate.
+
*'''CPU''': Atheros AR7161 680MHz
−
<a href="http://www.purevolume.com/9p5qorderbuspar">buspar 30 mg a day</a>  <a href="http://www.purevolume.com/940iordervibramycin">vibramycin 100 mg dispersible tablets</a>  They were given a corner table near the door.   <a href="http://www.purevolume.com/68h8onlinebactrim">levaquin vs bactrim</a> Just as I placed the parchment in your hand, and as you were in the act of in.  His face fell, and I could see a warning of danger in it, for there was a sudden fierce, sidelong look which meant killing. <a href="http://www.purevolume.com/cufpcheaplipitor">lipitor sales</a> <a href="http://www.purevolume.com/ck23onlinewellbutrin">cheapest place to buy wellbutrin</a>  <a href="http://www.purevolume.com/30geonlinecelebrex">buy celebrex tablets</a>
+
*'''Memory''': 128Mb
−
<a href="http://www.purevolume.com/pn3pbuysuprax">where to buy suprax</a> <a href="http://www.purevolume.com/e06monlinesinequan">sinequan quanto costa</a>  He didnt look at it, but reached up and drew the curtain aside and threw the knife far out into the blackness.  <a href="http://www.purevolume.com/v7tpovernightelavil">10 mg elavil weight gain</a> <a href="http://www.purevolume.com/fa3mbuyclaritin">buying claritin</a>  Hes an American friend of yours. <a href="http://www.purevolume.com/bxcrcheapbactrim">bactrim ds price walgreens</a>  <a href="http://www.purevolume.com/cvmebuyelavil">purchase order elavil online</a>  I dont want to complain, but there it is.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
−
<a href="http://www.purevolume.com/tw1bcheapmobic">mobic meloxicam 7 5 mg</a> <a href="http://www.purevolume.com/93klbuywellbutrin">wellbutrin sr 150 mg uses</a>  Such sentiments-for the half-credences of which I speak have never the full force of thought-such sentiments are seldom thoroughly stifled unless by reference to the doctrine of chance, or, as it is technically termed, the Calculus of Probabilities.  <a href="http://www.purevolume.com/ynjgonlinezyprexa">purchase zyprexa</a> In January 1946, Le Chiffre bought control of a chain of brothels, known as the Cordon Jaune, operating in Normandy and Brittany.   I have been so miserably weak, that to be able to think and move about is like feeling sunshine after a long spell of east wind out of a steel sky. <a href="http://www.purevolume.com/cg5rorderdeltasone">order generic deltasone overnight shipping</a>  <a href="http://www.purevolume.com/n5nxbuystrattera">how long does 40 mg strattera last</a>  <a href="http://www.purevolume.com/swo5cheapadvair">buy advair australia</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
# Generat per a:
 +
# RouterOSv3.x
 +
  :log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
#    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#   power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
  # -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
  #  the wLan/Lan interface: This interface will be destroyed during the script.
 +
#
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
  :delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
  # Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
  :delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
  /interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
  :delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
  /ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
  # Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
  do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  #
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
  add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 19:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik: 

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple: 

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a: 

http://guifi.net/guifi/device/13371/view/unsolclic

# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Obtingut de «http://ca.wiki.guifi.net/w/index.php?title=Mikrotik_RouterBoard_433&oldid=3733»
Eines de l'usuari