Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(easycap 2.0 windows 7)
 
(Hi ha 11 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
Yus, it was a big all, an there was nothin else in it.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/1hpeorderclaritin">claritin d 24hr</a>  <a href="http://www.purevolume.com/g9rbordercytotec">order cytotec online fast</a>  Get yo weight down easy dat way.   <a href="http://www.purevolume.com/qj4ibuystromectol">cheap stromectol buy now online</a>  But how to measure human endurance?  There was a short silence while Roo fell down another mouse-hole. <a href="http://www.purevolume.com/344abuyproscar">where can i buy proscar online</a>  <a href="http://www.purevolume.com/hoquovernightproscar">proscar cost ireland</a>  <a href="http://www.purevolume.com/umkbcheapcymbalta">how much does cymbalta cost at walgreens</a>
+
 
<a href="http://www.purevolume.com/0u4donlinezithromax">purchase zithromax without prescription</a>  <a href="http://www.purevolume.com/ccvrovernightzithromax">can you get zithromax without prescription</a>  May I make the only atonement in my power?  <a href="http://www.purevolume.com/33rgbuynolvadex">average cost of nolvadex</a>  <a href="http://www.purevolume.com/ito0cheappremarin">buy premarin cream without prescription</a>  Being the banker, hes got a slight advantage in the play, but knowing that Im making a dead set at him and not knowing, I hope, my capital, is bound to play on his nerves a bit, so Im hoping that we start about equal<a href="http://www.purevolume.com/ownmorderlevaquin">levaquin tabletas de 500 mg</a> <a href="http://www.purevolume.com/6zkfovernightproscar">proscar cost ireland</a>  Bond said impatiently, Youre not deformed!
+
== Introducció ==
<a href="http://www.purevolume.com/jfi5buyclaritin">order cheap claritin</a> <a href="http://www.purevolume.com/g2byonlineclaritin">claritin blood pressure</a>  There was an instant of silence.   <a href="http://www.purevolume.com/fc25ordertopamax">get topamax without a prescription</a> He didnt give much for their chances.   In the silence, the cheerful small sounds of the summers day crept through the closed window<a href="http://www.purevolume.com/nnpzonlinenizoral">nizoral 100 ml cena</a> <a href="http://www.purevolume.com/q367onlinevibramycin">vibramycin price</a>  <a href="http://www.purevolume.com/uj7dorderbuspar">cost buspar</a>
+
 
<a href="http://www.purevolume.com/iqpwcheapamoxil">buy amoxil cheap</a> <a href="http://www.purevolume.com/5wadovernightdesogen">desogen overnight us pharmacy</a>  They walked across the gravel and through another small door and Bond found himself at one end of a great vaulted godown with high circular windows through which dusty bars of sunshine slanted across a vista of bundles and bales of merchandise.   <a href="http://www.purevolume.com/f7nporderpremarin">overnight premarin ups</a> <a href="http://www.purevolume.com/w7izorderarcoxia">order arcoxia discount</a>  Van Helsing whispered to me, Jonathan is in a stupor such as we know the Vampire can produce<a href="http://www.purevolume.com/n4qybuycytotec">costo de cytotec en colombia</a> <a href="http://www.purevolume.com/oqmeorderproscar">finasteride 5mg proscar</a>   This was emphasized by the fact that the snowy mountain-top still held the sunset, and seemed to glow out with a delicate cool pink.
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/pjtqcheapplavix">buy generic plavix 75 mg</a> <a href="http://www.purevolume.com/rstybuysingulair">singulair tabs 10mg price</a>   When he finally rose and bent to smooth back her hair and finally kiss her eyes and her mouth good night, she reached out and turned on the light.   <a href="http://www.purevolume.com/ccvrovernightzithromax">zithromax online pharmacy</a> You and Le Chiffre were found and also your friend, Miss Lynd, who was unharmed and according to her account suffered no molestation.   The pain revived him, quickened his mind<a href="http://www.purevolume.com/wj7jorderalesse">cheap alesse no rx</a>  <a href="http://www.purevolume.com/crgronlineinderal">inderal no prescription</a>  <a href="http://www.purevolume.com/5in4buysynthroid">cheap synthroid uk overnight</a>
+
 
<a href="http://www.purevolume.com/vz3jbuypremarin">premarin vag cream cost</a> <a href="http://www.purevolume.com/auehbuypropecia">buy propecia with paypal</a>  It was with some bitterness in my heart that I answered that I had not, that as yet I had not seen any opportunity of sending letters to anybody.  <a href="http://www.purevolume.com/qxojcheapclaritin">buy claritin d uk</a> <a href="http://www.purevolume.com/grb7buysingulair">is there a generic for singulair 10mg</a>  Bond shipped his paddle and got down off one knee and sat with his back to the thwart. <a href="http://www.purevolume.com/9whgcheapelavil">elavil cost without insurance</a> <a href="http://www.purevolume.com/pkkworderlipitor">price difference between lipitor and generic</a>  A wrong is unredressed when retribution overtakes its redresser.  
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/2r3hcheapcipro">ciprofloxacin hydrochloride 500 mg side effects</a> <a href="http://www.purevolume.com/3s8honlineglucophage">glucophage buy cheap</a>  Then, for the first time in my life, I saw Van Helsing break down.  <a href="http://www.purevolume.com/ol0ybuysynthroid">buy synthroid online with no prescription</a>  When him fat like wit dat girl you kin tell herll be good in bed.   But Leiter was still interested in Bonds drink. <a href="http://www.purevolume.com/1db8overnightnexium">cheap nexium 40 mg</a> <a href="http://www.purevolume.com/5d30orderestrace">estrace price canada</a>  <a href="http://www.purevolume.com/px51cheapvaltrex">valtrex online australia</a>
+
 
<a href="http://www.purevolume.com/5xt9onlinestromectol">buy stromectol online purchase</a> <a href="http://www.purevolume.com/fpe4buysporanox">sporanox 100 mg</a>  At one period I thought of cutting the corpse into minute fragments and destroying them by fire.   <a href="http://www.purevolume.com/a6zeordervibramycin">vibramycin 60ml</a> <a href="http://www.purevolume.com/t6hrbuysinequan">buy sinequan no prescription</a>  The other added, He is young and strong.  <a href="http://www.purevolume.com/ldr7onlinelipitor">buy lipitor online australia</a>  <a href="http://www.purevolume.com/v356overnightpriligy">priligy for sale uk</a>  You know you have only to tell me what to do.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/86ovovernightperiactin">buy periactin in uk</a>  <a href="http://www.purevolume.com/9cphcheapdeltasone">purchase cheap deltasone 40mg overnight shipping</a>  You didnt hurt yourself, Little Piglet?  <a href="http://www.purevolume.com/h15hbuypremarin">purchase premarin cost</a> Let us see what they say: Imprimus.  He glanced at the bottles and was surprised to see that one contained nembutal sleeping? <a href="http://www.purevolume.com/3lg6buypropecia">buy generic propecia online cheap</a> <a href="http://www.purevolume.com/fkrronlineperiactin">buy online cheap periactin</a>  <a href="http://www.purevolume.com/xl8vcheapcelebrex">celebrex costochondritis</a>
+
 
<a href="http://www.purevolume.com/ghx1cheapilosone">purchase buy ilosone online</a> <a href="http://www.purevolume.com/lvb1onlineinderal">buy online cheap inderal</a>  Oh, my love, I am so glad you have come!   <a href="http://www.purevolume.com/nsynbuysynthroid">buy synthroid from canada</a>  <a href="http://www.purevolume.com/s78dcheapbiaxin">order biaxin without prescription</a>  You ought to take more trouble. <a href="http://www.purevolume.com/q565overnightelavil">elavil 30 mg</a> <a href="http://www.purevolume.com/a14oovernightalesse">alesse 28 cost</a>  It now occurred to me that the bandage, or surcingle, which enveloped me, was unique.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/sjsqbuyxenical">buy xenical australia</a>  <a href="http://www.purevolume.com/v2s4cheapnizoral">nizoral 100 ml cena</a>  Irritation flickered at the corner of the thin mouth.   <a href="http://www.purevolume.com/1wecbuyflomax">flomax cheap overnight delivery</a> Want me to park the heap?  In respectful silence we took the places assigned to us close round the tomb, but hidden from the sight of any one approaching. <a href="http://www.purevolume.com/c68fonlineelavil">elavil 10 mg for headaches</a> <a href="http://www.purevolume.com/80t9onlineduphaston">order duphaston online fast</a>  <a href="http://www.purevolume.com/mjpeovernightdesogen">buying desogen</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/lbzbonlineperiactin">buy periactin appetite stimulant</a> <a href="http://www.purevolume.com/37i5buylexapro">lexapro cost cvs</a>  Are you sure hes the same man?  <a href="http://www.purevolume.com/5lf0buylipitor">cost of lipitor at walmart pharmacy</a> <a href="http://www.purevolume.com/tvt1overnightmobic">buy mobic in canada</a>  Were they under G in the encyclopedia? <a href="http://www.purevolume.com/jw1yonlineflagyl">flagyl 500 mg tabletas dosis</a> <a href="http://www.purevolume.com/tqj8orderzovirax">zovirax cream cost</a>  So I shall get up and ask him not to do it.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/z3cmbuylasix">lasix water pills for sale</a>  <a href="http://www.purevolume.com/uyr1onlinesingulair">singulair 5mg chewable tablets price</a>  He came close to Pooh, and said in a loud whisper: Could you ask your friend to do his exercises somewhere else?   <a href="http://www.purevolume.com/9iwdbuyinderal">inderal cheap overnight delivery</a>  We shall tell him nothing, but only that we wish to learn.   He looked impatiently up at the tall figure in the dark blue single-breasted suit and into the obstinate eyes in the lean, brown face.  <a href="http://www.purevolume.com/kdqtcheapproscar">generic proscar no prescription</a>  <a href="http://www.purevolume.com/fvteonlineflagyl">purchase flagyl without prescription</a>  <a href="http://www.purevolume.com/sog3orderlevaquin">levaquin purchase online</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
  # Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
  #
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
  # -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#   power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
  # -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#   to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
  # -Don't run the script from telnet and being connected through an IP connection at
 +
#   the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
  # Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
  do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
  / routing filter
 +
  add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
  redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
  #
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari