Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(urethral play stories)
 
(Hi ha 9 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
Bond was due to call on the Governor at ten oclock.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/syxronlinealesse">buy alesse medication cod</a>  <a href="http://www.purevolume.com/f6h0buyxenical">what is xenical 120mg hard capsules for</a>  But he is growing, and some things that were childish at the first are now of mans stature.   <a href="http://www.purevolume.com/6f3tovernightdeltasone">order cheapest deltasone online no prescription required</a>  Youre in a nursing home at Royale and Ive been sent over from England to look after you.   He looked at us over her bowed head, with eyes that blinked damply above his quivering nostrils.  <a href="http://www.purevolume.com/6lyvordersingulair">singulair price australia</a>  <a href="http://www.purevolume.com/bm19buynexium">where can i get nexium cheap</a>  <a href="http://www.purevolume.com/6ch2cheapcipro">side effects of ciprofloxacin hcl 500mg tab</a>
+
 
<a href="http://www.purevolume.com/l4dvcheapperiactin">periactin migraine</a>  <a href="http://www.purevolume.com/1gmkcheapseroquel">seroquel xr 200 mg street price</a>  I drew away and his hand touched the string of beads which held the crucifix.   <a href="http://www.purevolume.com/om73ordercymbalta">60 mg cymbalta reviews</a> <a href="http://www.purevolume.com/avc0onlineflomax">flomax online canada</a>  The pilot didnt wait to wonder about the voice<a href="http://www.purevolume.com/cy8iorderclomid">increasing clomid from 50 mg to 100mg</a> <a href="http://www.purevolume.com/o0yrorderzyprexa">buy zyprexa medication cod</a>  If this searcher saw the darker brown stain, would he shoot into it or stab into it?
+
== Introducció ==
<a href="http://www.purevolume.com/8b3yonlinelipitor">crestor 10 mg equivalent lipitor</a> <a href="http://www.purevolume.com/53umcheapstrattera">30 mg strattera</a>  It will be a whole idea soon, and then, oh, unconscious cerebration, you will have to give the wall to your conscious brother<a href="http://www.purevolume.com/tgd7cheapadvair">how much does advair diskus 500 50 cost</a> She reached out a trembling hand for the glass of champagne and sipped at it with bowed headThe pulse of the sleeping sea seemed slower<a href="http://www.purevolume.com/2mtfovernightventolin">order ventolin online</a> <a href="http://www.purevolume.com/b5m2buytenormin">buy tenormin online uk</a>  <a href="http://www.purevolume.com/dupgcheappremarin">buying premarin without a script</a>
+
 
<a href="http://www.purevolume.com/qg3wovernightnexium">nexium 20 mg pret farmacia catena</a> <a href="http://www.purevolume.com/eq8yorderxenical">can you get xenical without prescription</a>  Bought himself a whole ghost town way out on Highway 95.  <a href="http://www.purevolume.com/wx9horderlasix">lasix 2ml</a>  <a href="http://www.purevolume.com/elwxonlineclomid">clomid 100</a>  Then he went into the bathroom and had a couple of Aspirins and a cold shower. <a href="http://www.purevolume.com/m9e2buynizoral">where can i buy nizoral in uk</a> <a href="http://www.purevolume.com/c4dccheapsingulair">singulair 4mg granules price</a>  I say I tell de police dey stole de car if dey don.
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/bbgvcheapmobic">buy mobic no prescription</a> <a href="http://www.purevolume.com/jruncheapperiactin">buy periactin generic</a>  When darkness at length overtook me, I went to bed in great anxiety, fearing to pass over the object of so much curiosity when I should have no opportunity of observing it.  <a href="http://www.purevolume.com/5gcmorderseroquel">seroquel xr annual sales</a> Have you ever had a pet snake that wore a bell round its neck and rang it to wake you?  What about the spoon she had stolen?  <a href="http://www.purevolume.com/ys47buymotrin">motrin 800 mg indications</a> <a href="http://www.purevolume.com/ajbhbuytopamax">buy topamax discount</a>  <a href="http://www.purevolume.com/kiq2overnightamoxil">amoxil overnight us pharmacy</a>
+
 
<a href="http://www.purevolume.com/g2mmonlineamoxil">amoxil price in pakistan</a> <a href="http://www.purevolume.com/zt5jcheapmobic">discount mobic online in australia</a>  Bond slipped his Beretta out of the holster and cradled it in his hand.  <a href="http://www.purevolume.com/zeeqcheaptopamax">topamax cost in canada</a> <a href="http://www.purevolume.com/g5ueorderarcoxia">arcoxia for costochondritis</a>  Although, as you say, they seem to be selling more and more jewellery every year. <a href="http://www.purevolume.com/smazonlinepremarin">premarin 0 625 mg bula</a> <a href="http://www.purevolume.com/ki8dcheapbuspar">buspar 5 mg street price</a>  What it all comes to is this, he said.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/kfcxonlineclaritin">claritin dosages</a>  <a href="http://www.purevolume.com/f1p9orderlasix">buy on line lasix cheap</a>  If she should show signs of faltering, I have the addresses of certain relatives, including children.   <a href="http://www.purevolume.com/jrwpovernightproscar">buy generic proscar online</a> Hows the weather been over here?  We found it without much difficulty, when, dismissing her, I proceeded to examine the place.  <a href="http://www.purevolume.com/j4twcheapelavil">cheap elavil uk overnight</a> <a href="http://www.purevolume.com/v5tabuyclaritin">claritin d children</a>  <a href="http://www.purevolume.com/hpqxcheapnizoral">nizoral 2 for sale</a>
+
 
<a href="http://www.purevolume.com/1ip5onlinedesogen">best buy for desogen</a> <a href="http://www.purevolume.com/ljp7ordernexium">buy nexium online without prescription</a>  If it was the wind, said Owl, considering the matter, then it wasnt Poohs fault.   <a href="http://www.purevolume.com/upv5overnightdesogen">discount desogen</a>  <a href="http://www.purevolume.com/hv9bonlinenexium">nexium mups 20mg 90</a>  I am looking, Roo, dear, said Kanga rather severely. <a href="http://www.purevolume.com/8lszorderadvair">advair diskus price walmart</a>  <a href="http://www.purevolume.com/a5sdonlinecipro">buy cipro free delivery</a>  But I dont think he meant to, said Pooh.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/ejcjonlineduphaston">duphaston buy cheap</a>  <a href="http://www.purevolume.com/0i9lbuytopamax">75 mg topamax</a>  It seemed to be the usual grey dead coral broken, where there was a pocket of earth, by low scrub and screwpalm.   <a href="http://www.purevolume.com/ur6sovernightstromectol">buy stromectol in uk</a>  Suddenly it struck me that this might be the moment and means of my doom.  She had made the effort with success.  <a href="http://www.purevolume.com/gs34overnightpriligy">priligy buy in malaysia</a>  <a href="http://www.purevolume.com/aq1ionlineseroquel">100 ml seroquel</a>  <a href="http://www.purevolume.com/sjsqbuyxenical">xenical side effect</a>
+
 
<a href="http://www.purevolume.com/0vrqcheapdesogen">buy cheap desogen online</a> <a href="http://www.purevolume.com/swxqorderstrattera">strattera mg doses</a>  The physical suffering I underwent contributed also to render me nearly incapable of making any exertion for the preservation of my life.  <a href="http://www.purevolume.com/45u6buylevaquin">purchase levaquin overnight</a> <a href="http://www.purevolume.com/jb52buypremarin">premarin cream price comparison</a>  With extra care he put his weapons back in their places and painfully began to drag himself on into the blackness. <a href="http://www.purevolume.com/vsl9overnightlexapro">lexapro overnight</a>  <a href="http://www.purevolume.com/kiu8cheaptenormin">buy cheap tenormin</a>  People start preserving something-churches, old houses, decaying pictures, birds-and theres always a hullabaloo of some sort.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/mrp4buypriligy">priligy sales</a> <a href="http://www.purevolume.com/707scheapflagyl">cheapest flagyl online</a>  He said anxiously, Are you hurt, Honey?  <a href="http://www.purevolume.com/e2h2buyproscar">where can i buy proscar in the uk</a>  He was enchained by certain superstitious impressions in regard to the dwelling which he tenanted, and whence, for many years, he had never ventured forth - in regard to an influence whose supposititious force was conveyed in terms too shadowy here to be re-stated - an influence which some peculiarities in the mere form and substance of his family mansion, had, by dint of long sufferance, he said, obtained over his spirit-an effect which the physique of the gray walls and turrets, and of the dim tarn into which they all looked down, had, at length, brought about upon the morale of his existence.   And then it was done and Bond knelt on the ground with his head down, fighting the dizziness that threatened to drown him. <a href="http://www.purevolume.com/fs7scheapnizoral">nizoral price philippines</a> <a href="http://www.purevolume.com/9ju1buyalesse">buy alesse online no prescription</a>  <a href="http://www.purevolume.com/n6zhbuyminocin">minocin 50 mg side effects</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/42q6cheapdesogen">side effects desogen</a> <a href="http://www.purevolume.com/o6muonlinenolvadex">how much should nolvadex cost</a>  No, he doesnt, for Arthur tried twice to make a chance, and I helping him all I could, I am not ashamed to say it now.  <a href="http://www.purevolume.com/c4o2buynizoral">nizoral 5mg</a> <a href="http://www.purevolume.com/hefbbuysuprax">buy suprax online cheap in germany</a>  She paused and smiled up at him<a href="http://www.purevolume.com/tabzcheaparimidex">arimidex cost in canada</a> <a href="http://www.purevolume.com/s0mcbuylexapro">for sale lexapro</a>  The family is connected, in some way, with Maelzel, of Automaton-chess-player memory.
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/wemzbuypremarin">premarin cream online pharmacy</a> <a href="http://www.purevolume.com/c3h2onlinelasix">purchase lasix discount</a>  He lifted his right forearm across his eyes in the old salute of the West Indians.   <a href="http://www.purevolume.com/5d3xcheaptopamax">75 mg topamax</a>  With a little trouble we found the key on the bunch and opened the door.   He cursed himself and cursed the hubris which had made him so sure the battle was won and the enemy in flight. <a href="http://www.purevolume.com/uoyybuyalesse">buy alesse tablets</a>  <a href="http://www.purevolume.com/85vzcheapcelebrex">celebrex dosage 600 mg</a>  <a href="http://www.purevolume.com/vxj4buypremarin">buy premarin cream</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
# Generat per a:
 +
# RouterOSv3.x
 +
  :log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
# Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
  # 1.-As a script. Upload this output as a script either with:
 +
#    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#   power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
  # -Be sure that all packages are activated.
 +
  # -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
#
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
  :delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
  add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
  dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
  redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
  /  
 +
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari