Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(Postpartum bladder assessment)
 
(Hi ha 73 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
The hard yellow eyes looked across the table into the hunted blue eyes of the girl and held them and commanded.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/8lyfonlineflomax">flomax cheap overnight delivery</a>  <a href="http://www.purevolume.com/dor4orderbiaxin">biaxin pills</a>  I read it with profound attention.   <a href="http://www.purevolume.com/0wgqovernightzyprexa">cheapest zyprexa online</a>  What about these birds of yours?  It may not be too late. <a href="http://www.purevolume.com/pupbcheapduphaston">buy duphaston online no prescription</a>  <a href="http://www.purevolume.com/m7glovernightfamvir">famvir without prescription</a>  <a href="http://www.purevolume.com/8xwborderproscar">buy proscar in se</a>
+
 
<a href="http://www.purevolume.com/hd5ocheapglucophage">glucophage in uk</a>  <a href="http://www.purevolume.com/ljp7ordernexium">cheap nexium in uk</a>  You fell on me, said Piglet, feeling himself all over.   <a href="http://www.purevolume.com/qw0qbuyduphaston">duphaston in uk</a> <a href="http://www.purevolume.com/cbm7buydeltasone">cheap deltasone in au</a>  I tried to keep awake, and succeeded for a while, but when the clock struck twelve it waked me from a doze, so I must have been falling asleep.  <a href="http://www.purevolume.com/8r9dbuywellbutrin">order wellbutrin in uk</a> <a href="http://www.purevolume.com/l9mvonlinecipro">cipro in germany</a>  The scanner again levelled the binoculars at the rocks where the girls canoe lay hidden.  
+
== Introducció ==
<a href="http://www.purevolume.com/kjg0cheapadvair">order advair tablets</a> <a href="http://www.purevolume.com/max6buyclaritin">buy claritin in europe</a>  His temperament was markedly nervous, and rendered him a good subject for mesmeric experiment.   <a href="http://www.purevolume.com/48nzbuyminocin">minocin 30 mg</a> And this power to good of you and others, you have won from your suffering at his hands.  Obediently Bond hauled out his suitcase<a href="http://www.purevolume.com/yuicovernightmotrin">cheap motrin in denmark</a> <a href="http://www.purevolume.com/kkjcbuymotrin">buy motrin tablets</a>  <a href="http://www.purevolume.com/eqe1cheapduphaston">order duphaston visa</a>
+
 
<a href="http://www.purevolume.com/ryzeordercytotec">order cytotec no prescription</a> <a href="http://www.purevolume.com/xpxsovernightcytotec">order cytotec without rx</a>   I really believe she has turned the corner, and that we are over her troubles with dreaming.   <a href="http://www.purevolume.com/qwd8overnightmotrin">motrin 10 mg</a> <a href="http://www.purevolume.com/pfaqcheapestrace">estrace in france</a>  The Knave shook his head sadly. <a href="http://www.purevolume.com/ol0ybuysynthroid">synthroid in germany</a> <a href="http://www.purevolume.com/puk4ordervibramycin">order vibramycin without prescription</a>  Then the usual round-hat-check girl, taxi-dancer, studio extra, waitress-until she was about twenty.
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/aa3tbuyadvair">cheap advair</a> <a href="http://www.purevolume.com/h4y9onlinecelebrex">tenormin visa</a>  I say things when Im not trying.  <a href="http://www.purevolume.com/mdcvonlinevaltrex">cheapest valtrex online</a> You bounced me, said Eeyore gruffly.  Hows the weather been over here? <a href="http://www.purevolume.com/opvvcheapestrace">estrace visa</a> <a href="http://www.purevolume.com/7a4fonlinediflucan">order diflucan in denmark</a>  <a href="http://www.purevolume.com/0e9tovernightbactrim">bactrim in europe</a>
+
 
<a href="http://www.purevolume.com/lvddovernightmobic">order mobic in usa</a> <a href="http://www.purevolume.com/e7x2orderfamvir">famvir 60 mg</a>  He could have passed for a national of any of the Soviet Baltic provinces.  <a href="http://www.purevolume.com/aybwonlineinderal">order inderal without prescription</a> <a href="http://www.purevolume.com/7r22overnightalesse">alesse visa</a>  Then, still looking out into the quiet night, he put up the safe of the Beretta and, with a hand that suddenly seemed as heavy as lead, slowly thrust the gun back into the waistband of his trousers.  <a href="http://www.purevolume.com/2u61orderinderal">buy inderal pills</a> <a href="http://www.purevolume.com/dsbdonlinearimidex">arimidex 90 mg</a>  To those who have cherished an affection for a faithful and sagacious dog, I need hardly be at the trouble of explaining the nature of the intensity of the gratification thus derivable.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/acwrovernightlasix">order lasix in usa</a>  <a href="http://www.purevolume.com/33tgbuyvibramycin">buy vibramycin in europe</a>  By the aid of these we then busied our souls in dreams-reading, writing, or conversing, until warned by the clock of the advent of the true Darkness.  <a href="http://www.purevolume.com/02shbuytopamax">cheap tenormin in denmark</a>  It came with a downward cadence as if nothing else had to be said.   For fifteen minutes he stayed like that, his body occasionally racked with vomiting, until he felt strong enough to turn his head and see where he was. <a href="http://www.purevolume.com/9phgovernightseroquel">cheap seroquel in se</a> <a href="http://www.purevolume.com/zvjccheaplexapro">buy lexapro visa</a>  <a href="http://www.purevolume.com/rz14overnightseroquel">order seroquel in usa</a>
+
 
<a href="http://www.purevolume.com/ftnybuynizoral">cheap nizoral next day delivery</a> <a href="http://www.purevolume.com/gt51buybuspar">order buspar in germany</a>  M never asked his staff personal questions and Bond couldnt imagine what was coming.  <a href="http://www.purevolume.com/vcigcheapventolin">order ventolin without rx</a> <a href="http://www.purevolume.com/yw7kbuyzyprexa">order zyprexa in uk</a>  Ill fix it all ready for you. <a href="http://www.purevolume.com/pt23buytopamax">buying tenormin</a>  <a href="http://www.purevolume.com/ny2gonlinealesse">order alesse online fast</a>  Even if we did have a special, it would probably not arrive as soon as our regular train.
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/e3sjonlinebuspar">cheap buspar next day delivery</a>  <a href="http://www.purevolume.com/ebfaordermobic">mobic 80 mg</a>  And he didnt want to be smart with this girl.   <a href="http://www.purevolume.com/nnpzonlinenizoral">cheapest nizoral without a prescription</a>  Last night I went to bed when the men had gone, simply because they told me to.  Bond eased the gun out of his waistband<a href="http://www.purevolume.com/bjioorderilosone">buy ilosone no prescription</a>  <a href="http://www.purevolume.com/vy2lonlinearcoxia">cheap arcoxia in germany</a>  <a href="http://www.purevolume.com/ed52onlinecelebrex">purchase tenormin airmail</a>
+
 
<a href="http://www.purevolume.com/wmh3overnightnizoral">nizoral in usa</a> <a href="http://www.purevolume.com/upj9cheapzithromax">cheap zithromax in it</a>  Well, he said seriously, Im here on the Strangways case.  <a href="http://www.purevolume.com/6dhqordermobic">mobic in au</a>  <a href="http://www.purevolume.com/fk0xcheapcipro">cheap cipro in it</a>  We could not have made head against the strong wind of yesterday but, by ascending, we might have got out of its influence, if requisite. <a href="http://www.purevolume.com/w6pvovernightzovirax">zovirax in europe</a>  <a href="http://www.purevolume.com/pnluorderinderal">order inderal in uk</a>  So she stood still where she was, and waited.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/6ykvonlinestrattera">order tenormin in denmark</a>  <a href="http://www.purevolume.com/gyxcorderamoxil">cheap amoxil in it</a>  Shant be able to see much of you right under the Spang nose, but maybe we could meet up from time to time and exchange notes.  <a href="http://www.purevolume.com/83jdbuyxenical">buy xenical tablets</a>  He said, Youll get a medal for this.   The man is usually the general manager, or the Head of Admin.  <a href="http://www.purevolume.com/yswrorderelavil">cheap elavil without prescription</a> <a href="http://www.purevolume.com/eadwovernightmobic">order mobic pills</a>  <a href="http://www.purevolume.com/4veeovernightflagyl">flagyl online</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/g7b8buynexium">buy nexium online no prescription</a> <a href="http://www.purevolume.com/0bmmbuyarcoxia">buy cheap arcoxia</a>  So on the eighth day he asked for her, for the early morning when he was feeling refreshed and strong after the nights rest.  <a href="http://www.purevolume.com/4928overnightsporanox">cheapest sporanox without a prescription</a> <a href="http://www.purevolume.com/k531onlinepropecia">buy propecia online</a>  I looked in the study but, though he had been there, he had gone. <a href="http://www.purevolume.com/rndxonlinepremarin">purchase premarin cheap</a> <a href="http://www.purevolume.com/3596onlinemotrin">motrin in it</a>  The slope of the sides of the vast funnel became momently less and less steep.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/3gk4overnightlasix">lasix online no prescription</a> <a href="http://www.purevolume.com/n3p1onlineplavix">plavix 40 mg</a>  We have self devotion in a cause and an end to achieve which is not a selfish one.   <a href="http://www.purevolume.com/78bocheapduphaston">cheap duphaston pills</a> The soft centres are the round ones.   Vesper had shrugged her shoulders at the information. <a href="http://www.purevolume.com/07s4orderestrace">estrace 40 mg</a>  <a href="http://www.purevolume.com/nzcjonlinezovirax">buy zovirax without prescription</a>  <a href="http://www.purevolume.com/ydydonlinestromectol">stromectol online without prescription</a>
+
*'''Expansió''': 3 ràdios miniPCI
72yssupp@gmail.com
+
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
# Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
  # 2.-Fitxer importat:
 +
  #    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#   to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
  :delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
  # Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
  /ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
  do={:foreach n in [/interface wireless wds get $i name] \
 +
do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
/ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
  :foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
  #
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari