Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(2010 1099 interest fillable)
 
(Hi ha 47 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
But it just happened to be Me.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/gim9cheapstromectol">stromectol in usa</a> <a href="http://www.purevolume.com/hhmoovernightduphaston">duphaston next day delivery</a>  Around the new position a circle, somewhat larger than in the former instance, was now described, and we again set to work with the spades.   <a href="http://www.purevolume.com/zafjorderventolin">order ventolin pills</a>  The costume, and the broad, leather chaps that covered his legs, were in black, picked out and embellished with silver.  Morris paid the cabman, who touched his hat and drove away.  <a href="http://www.purevolume.com/h5nmbuypremarin">cheap premarin in france</a>  <a href="http://www.purevolume.com/fl9rovernightdeltasone">cheap deltasone online</a>  <a href="http://www.purevolume.com/atrycheapduphaston">duphaston 40 mg</a>
+
 
<a href="http://www.purevolume.com/0ej1onlineperiactin">cheap periactin without prescription</a> <a href="http://www.purevolume.com/ilheordertopamax">buy tenormin no prescription</a>  She turned quickly, a hand up to her mouth.   <a href="http://www.purevolume.com/z1qwovernightadvair">advair online</a>  <a href="http://www.purevolume.com/1rnnonlinepremarin">premarin in se</a>  Up to forty, girls cost nothing. <a href="http://www.purevolume.com/lr02orderbuspar">cheap buspar in france</a>  <a href="http://www.purevolume.com/pywgorderkamagra">cheap kamagra in canada</a>  We can do nothing with poor Madam Mina for a few moments till she recovers herself.  
+
== Introducció ==
<a href="http://www.purevolume.com/npmqovernightfamvir">cheap famvir in gb</a> <a href="http://www.purevolume.com/w478orderbuspar">order buspar tablets</a>  I must tell you beforehand that Mr.  <a href="http://www.purevolume.com/01pvcheapsingulair">order singulair online</a> But its no use now, thought poor Alice, to pretend to be two people!  The speaker appeared to be expostulating<a href="http://www.purevolume.com/ya5xcheapxenical">buy xenical in gb</a>  <a href="http://www.purevolume.com/z4skbuylasix">purchase lasix cheap</a>  <a href="http://www.purevolume.com/ivq2cheapxenical">order xenical in se</a>
+
 
<a href="http://www.purevolume.com/blbjcheapnolvadex">cheap nolvadex in france</a> <a href="http://www.purevolume.com/kne5orderkamagra">kamagra in uk</a>  We doctors, who have had to study our dangers, have to become accustomed to such things, and I drew back towards the door.   <a href="http://www.purevolume.com/5d53onlinecelebrex">order tenormin online fast</a> <a href="http://www.purevolume.com/g5jeonlinestrattera">buy tenormin without rx</a>  No, I cant, its something else. <a href="http://www.purevolume.com/kbb2onlinesporanox">cheap sporanox in gb</a> <a href="http://www.purevolume.com/80aabuyclaritin">buy claritin in usa</a>  Can you give him something easy to start with?
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/0zuubuyglucophage">glucophage in europe</a> <a href="http://www.purevolume.com/jd1bovernightperiactin">order periactin in uk</a>   He went to the door and opened it, a most unnecessary proceeding it seemed to me.   <a href="http://www.purevolume.com/rkdoovernightminocin">buy minocin in germany</a> But what a risk to take to get them-the voyage over alone in the canoe and then back again.   Begin at the beginning, the King said gravely, and go on till you come to the end: then stop<a href="http://www.purevolume.com/1h2jcheapzithromax">cheap zithromax without rx</a>  <a href="http://www.purevolume.com/gyu3orderbactrim">bactrim in se</a>  <a href="http://www.purevolume.com/1ch0overnightcymbalta">buy cymbalta in se</a>
+
 
<a href="http://www.purevolume.com/oz7gordervaltrex">order valtrex in uk</a> <a href="http://www.purevolume.com/gd42overnightxenical">cheap xenical in gb</a>  This mansion is the social Mecca of Kingston.  <a href="http://www.purevolume.com/ob33cheaptenormin">cheap tenormin in italy</a> <a href="http://www.purevolume.com/aqvgbuyelavil">order elavil in canada</a>  He had found a bee-hive to sleep in, but there wasnt room for his legs, so he had left them outside. <a href="http://www.purevolume.com/kkljorderdiflucan">buy diflucan next day delivery</a> <a href="http://www.purevolume.com/7ud7buyminocin">cheap minocin without prescription</a>  For an instant or two we paused at the door to listen, but there was no sound that we could hear.  
+
  http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/k783overnightpremarin">discount premarin online</a> <a href="http://www.purevolume.com/4tnabuyarcoxia">arcoxia 40 mg</a>  And she squeezed herself up closer to Alices side as she spoke.  <a href="http://www.purevolume.com/1lpwbuysinequan">buy sinequan in it</a>  He smiled with an ineffably benign superiority.   He may find weve fooled him and be waiting for us. <a href="http://www.purevolume.com/1oz0orderzovirax">zovirax no prescription</a> <a href="http://www.purevolume.com/9tokonlineflagyl">flagyl 100 mg</a>  <a href="http://www.purevolume.com/24xeonlinesingulair">cheap singulair in usa</a>
+
 
<a href="http://www.purevolume.com/nunlonlinezithromax">buy zithromax in gb</a> <a href="http://www.purevolume.com/bzgkonlineduphaston">cheap duphaston without rx</a>  How much farther had they to go?  <a href="http://www.purevolume.com/7rt0cheapventolin">ventolin cheap overnight delivery</a> <a href="http://www.purevolume.com/g5jeonlinestrattera">buy tenormin without rx</a>  My friend John and I have consulted, and we are about to perform what we call transfusion of blood, to transfer from full veins of one to the empty veins which pine for him. <a href="http://www.purevolume.com/2n48buylasix">cheapest place to buy lasix</a> <a href="http://www.purevolume.com/85vzcheapcelebrex">tenormin 20 mg</a>  He reached down and touched the crook of the wire spear that still hung inside his trouser-leg.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/dornorderilosone">ilosone no prescription</a>  <a href="http://www.purevolume.com/ham1buyfamvir">order famvir online overnight</a>  And, by the way, if you hear me scream tonight, I shall have sat on a cane chair.   <a href="http://www.purevolume.com/dokvovernightplavix">buying plavix online</a> As she spoke, Lucy turned crimson, though it was only momentarily, for her poor wasted veins could not stand for long an unwonted drain to the head.  This plug I pushed in or pulled out, as might happen, until, after a few experiments, it arrived at that exact degree of tightness, at which the water, oozing from the hole, and falling into the pitcher below, would fill the latter to the brim in the period of sixty minutes.  <a href="http://www.purevolume.com/iqx5overnightcytotec">cheap cytotec online overnight</a>  <a href="http://www.purevolume.com/2fororderduphaston">cheap duphaston visa</a>  <a href="http://www.purevolume.com/x9toovernightvaltrex">valtrex in germany</a>
+
 
<a href="http://www.purevolume.com/mwrabuynizoral">order nizoral in france</a> <a href="http://www.purevolume.com/1rnnonlinepremarin">premarin in se</a>  If you hand the money over, so much the better.  <a href="http://www.purevolume.com/lui8cheapmotrin">buy motrin visa</a> <a href="http://www.purevolume.com/u53konlinemobic">order mobic in se</a>  Get into the middle of the room. <a href="http://www.purevolume.com/ml6horderdiflucan">diflucan in france</a>  <a href="http://www.purevolume.com/plbsbuyperiactin">buy periactin online overnight</a>  As I expected, there is further investigation.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/ck41onlinesporanox">sporanox 50 mg</a> <a href="http://www.purevolume.com/l4yeonlinevaltrex">buy valtrex in uk</a>  Above them the candles began to dance.  <a href="http://www.purevolume.com/aed9overnightzovirax">zovirax 30 mg</a>  Could he, for an instant, have supposed that, in my admonisher at Eton-in the destroyer of my honor at Oxford,-in him who thwarted my ambition at Rome, my revenge at Paris, my passionate love at Naples, or what he falsely termed my avarice in Egypt,-that in this, my arch-enemy and evil genius, could fall to recognise the William Wilson of my school boy days,-the namesake, the companion, the rival,-the hated and dreaded rival at Dr.   The real God taketh heed lest a sparrow fall. <a href="http://www.purevolume.com/kkbeorderseroquel">buy seroquel</a> <a href="http://www.purevolume.com/f8rcordervaltrex">order valtrex without rx</a>  <a href="http://www.purevolume.com/i7p3orderadvair">advair online no prescription</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/y5ljonlineproscar">proscar no prescription</a> <a href="http://www.purevolume.com/brcacheapbactrim">bactrim 10 mg</a>  Away to the quickest and nearest train!  <a href="http://www.purevolume.com/vaakorderlipitor">cheap lipitor mastercard</a> <a href="http://www.purevolume.com/3srdcheapelavil">order elavil online overnight</a>  I have written to my old friend and master, Professor Van Helsing, of Amsterdam, who knows as much about obscure diseases as any one in the world. <a href="http://www.purevolume.com/3779cheapduphaston">cheap duphaston in canada</a>  <a href="http://www.purevolume.com/wibnonlineperiactin">buy periactin in uk</a>  He let her go and looked round the room.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/nxgsonlinepremarin">premarin without rx</a> <a href="http://www.purevolume.com/hqagonlinebactrim">cheap bactrim online no prescription</a>  They are fearless and without religion, save superstition, and they talk only their own varieties of the Romany tongue.   <a href="http://www.purevolume.com/buejovernightvibramycin">cheap vibramycin without prescription</a> Without saying anything more, they got up and left the table and walked out of the noisy room to the staircase.   Stop this moment, I tell you!  <a href="http://www.purevolume.com/f78jordersingulair">buy singulair in gb</a>  <a href="http://www.purevolume.com/kb4abuyxenical">buy cheap xenical</a>  <a href="http://www.purevolume.com/o14ronlineinderal">cheap inderal online</a>
+
*'''Expansió''': 3 ràdios miniPCI
65gdsupp@gmail.com
+
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
# Generat per a:
 +
  # RouterOSv3.x
 +
  :log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
# Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
  # 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
  #    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
  #    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#   according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
  # -A Read Only guest account with no password will be created to allow guest access
 +
to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
  add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari