Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(free grammar worksheets for middle school)
 
(Hi ha 83 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
While you ascertain the validity of the affidavits, I will examine the newspapers more generally than you have as yet done.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/zz60onlinezithromax">zithromax in it</a> <a href="http://www.purevolume.com/21jyorderarimidex">cheap arimidex tablets</a>  Then the dogs howled, away beyond the dark trees in His house.   <a href="http://www.purevolume.com/nh1acheapglucophage">glucophage 90 mg</a>  Driving up, and Ill get you in at my dump.  But she will not, or cannot, give them utterance.  <a href="http://www.purevolume.com/6jirbuycymbalta">discount cymbalta online</a>  <a href="http://www.purevolume.com/4tpbbuyalesse">order alesse in it</a>  <a href="http://www.purevolume.com/5x9vovernightclaritin">buy claritin in italy</a>
+
 
<a href="http://www.purevolume.com/7gp1cheapkamagra">kamagra 20 mg</a> <a href="http://www.purevolume.com/1vkybuyfamvir">order famvir in france</a>  No, said Pooh, because it makes different marks.   <a href="http://www.purevolume.com/6g6wordernolvadex">buy nolvadex without prescription</a>  <a href="http://www.purevolume.com/z2rocheapamoxil">buy amoxil online cheap</a>  I asked him if he could tell me the number of the house in Piccadilly, to which he replied, Well, guvnor, I forgits the number, but it was only a few door from a big white church, or somethink of the kind, not long built<a href="http://www.purevolume.com/tu1tbuyilosone">buy ilosone in sweden</a> <a href="http://www.purevolume.com/s56bovernightmotrin">cheap motrin in it</a>  He seems to have been a pleasant spoken chap.
+
== Introducció ==
<a href="http://www.purevolume.com/pjtqcheapplavix">buy plavix in gb</a> <a href="http://www.purevolume.com/msrqcheapplavix">plavix mastercard</a>  Did any one else see anything?  <a href="http://www.purevolume.com/hz9mbuyarimidex">buy arimidex in denmark</a> The waiters wore striped waistcoats and green baize aprons.   I burned to say if but one word, by way of triumph, and to render doubly sure their assurance of my guiltlessness<a href="http://www.purevolume.com/o396overnightduphaston">buy duphaston in germany</a> <a href="http://www.purevolume.com/cmyxcheapsynthroid">order synthroid without rx</a>  <a href="http://www.purevolume.com/sk9dordervibramycin">vibramycin in sweden</a>
+
 
<a href="http://www.purevolume.com/oqoabuyseroquel">buy seroquel without prescription</a> <a href="http://www.purevolume.com/esotorderxenical">buy xenical online cheap</a>  Even Smallest-of-all, a friend-and-relation of Rabbits who thought he had once seen Christopher Robins foot, but couldnt be quite sure because perhaps it was something else, even S.  <a href="http://www.purevolume.com/d8nhorderdiflucan">buy diflucan on line</a> <a href="http://www.purevolume.com/hmjfbuyperiactin">order periactin in denmark</a>  He opened his eyes a fraction<a href="http://www.purevolume.com/jqybcheappremarin">premarin in uk</a> <a href="http://www.purevolume.com/zxwdcheapdesogen">order desogen online overnight</a>   You have often observed the profound self-cognizance evinced by the sleep-waker-the extensive knowledge he displays upon all points relating to the mesmeric condition itself and from this self-cognizance may be deduced hints for the proper conduct of a catechism.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/4fctonlinepremarin">buy premarin in italy</a>  <a href="http://www.purevolume.com/ekrhovernightbactrim">cheap bactrim in sweden</a>  Our own vessel was at length ceasing from her struggles, and sinking with her head to the sea.  <a href="http://www.purevolume.com/34rvovernightstrattera">buy tenormin visa</a> I beg your pardon, Sir, he said, but did you say the Low Field?  How dare you cast eyes on him when I had forbidden it?  <a href="http://www.purevolume.com/ywv2orderbactrim">order bactrim in france</a> <a href="http://www.purevolume.com/kg8cbuycipro">cipro 100 mg</a>  <a href="http://www.purevolume.com/vvyacheapcelebrex">order tenormin in gb</a>
+
 
<a href="http://www.purevolume.com/xhfpovernightwellbutrin">wellbutrin without rx</a> <a href="http://www.purevolume.com/67rpovernightproscar">order proscar in uk</a>  These could be poured out by slipping sideways one ridge of welting.  <a href="http://www.purevolume.com/1w2yonlinevibramycin">buy vibramycin on line</a> <a href="http://www.purevolume.com/9opwonlinesinequan">buy sinequan online cheap</a>  Oh, Eeyore, began Piglet a little nervously, because Eeyore was busy. <a href="http://www.purevolume.com/hfaiovernightsynthroid">cheap synthroid in germany</a> <a href="http://www.purevolume.com/59qoorderinderal">buying inderal online</a>  The hand came out holding a small metal cylinder with a cap which Le Chiffre unscrewed.
+
  http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/nr5torderadvair">cheap advair no prescription</a> <a href="http://www.purevolume.com/guhborderseroquel">seroquel without prescription</a>  He would not trouble himself with this kind of police work.  <a href="http://www.purevolume.com/zjxpcheapproscar">buy proscar in germany</a>  It was her disgust and her contempt for a person who could live in the middle of such a smell that helped her to look down into the yellowish eyes that stared at her through the square glass panes.   After the remains of his luncheon had been removed, he sat at his window gazing out to sea until there came a knock on the door as the masseur, a Swede, presented himself Silently he got to work on Bond from his feet to his neck, melting the tensions in his body and calming his still twanging nerves. <a href="http://www.purevolume.com/f4jzcheapmobic">mobic 100 mg</a> <a href="http://www.purevolume.com/7i06overnightalesse">cheap alesse in au</a>  <a href="http://www.purevolume.com/7dq4cheapinderal">inderal online without prescription</a>
+
 
<a href="http://www.purevolume.com/1ww8overnightventolin">cheap ventolin online no prescription</a> <a href="http://www.purevolume.com/863fordermotrin">buy motrin mastercard</a>  Now all my hours are trances And all my nightly dreams Are where the dark eye glances, And where thy footstep gleams, In what ethereal dances, By what Italian streams.   <a href="http://www.purevolume.com/8pg9buyglucophage">glucophage in gb</a>  <a href="http://www.purevolume.com/2wymbuyventolin">buy ventolin in it</a>  In due course Bond came into her room to get himself another drink. <a href="http://www.purevolume.com/oe8fcheapcipro">cipro pills</a>  <a href="http://www.purevolume.com/45ducheaplipitor">lipitor tablets</a>  He liked being an actor and a spectator and from his chair to take part in other mens dramas and decisions, until it came to his own turn to say that vital yes or no, generally on a fifty-fifty chance.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/q39uonlinepremarin">cheap premarin in germany</a>  <a href="http://www.purevolume.com/7i06overnightalesse">cheap alesse in au</a>  Quarrel told him to dip himself in the river water.  <a href="http://www.purevolume.com/1koeonlinedesogen">buy desogen tablets</a> Messieurs, mesdames, les jeux sont faits.  Death had given back part of her beauty, for her brow and cheeks had recovered some of their flowing lines. <a href="http://www.purevolume.com/ydumonlineamoxil">amoxil 80 mg</a> <a href="http://www.purevolume.com/rcx8overnightpriligy">cheapest priligy</a>  <a href="http://www.purevolume.com/oecforderxenical">buy xenical without prescription</a>
+
 
<a href="http://www.purevolume.com/dnpiorderproscar">online purchase proscar</a> <a href="http://www.purevolume.com/t68ccheapilosone">buy ilosone without prescription</a>  Never, even in the midst of our despair about poor Lucy, had he looked more stern.  <a href="http://www.purevolume.com/lgpgcheapflomax">buy flomax visa</a>  <a href="http://www.purevolume.com/827rovernightzyprexa">buy zyprexa in se</a>  I could see that he spoke as bravely as he could to comfort Harker. <a href="http://www.purevolume.com/r3mcorderlexapro">lexapro without prescription</a>  <a href="http://www.purevolume.com/nwflovernightstrattera">buy tenormin without prescription</a>  The High Fieldll cost a packet this evening.  
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/kulzonlinefamvir">order famvir in germany</a> <a href="http://www.purevolume.com/hjnhonlinebuspar">order buspar online</a>  This was when we had come back to town, and he was having a cup of tea before starting on his return to Amsterdam.  <a href="http://www.purevolume.com/ygqjonlinestrattera">cheap tenormin tablets</a> Well, the chin was pointed, but at least it wasnt sharp.  One morning, in cool blood, I slipped a noose about its neck and hung it to the limb of a tree - hung it with the tears streaming from my eyes, and with the bitterest remorse at my heart - hung it because I knew that it had loved me, and because I felt it had given me no reason of offence - hung it because I knew that in so doing I was committing a sin - a deadly sin that would so jeopardize my immortal soul as to place it - if such a thing were possible - even beyond the reach of the infinite mercy of the Most Merciful and Most Terrible God.  <a href="http://www.purevolume.com/m2mubuyminocin">buy minocin</a> <a href="http://www.purevolume.com/n2rkcheapperiactin">periactin in europe</a>  <a href="http://www.purevolume.com/qt8zovernightsingulair">singulair cheap overnight delivery</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/opkwovernightlevaquin">levaquin in gb</a> <a href="http://www.purevolume.com/2ebzorderarimidex">buying arimidex</a>  I cant even hazard a guess.   <a href="http://www.purevolume.com/k1eionlinestromectol">stromectol online overnight</a> <a href="http://www.purevolume.com/e3sjonlinebuspar">cheap buspar next day delivery</a>  Upon one occasion he saw this, I think, and afterwards avoided, or made a show of avoiding me. <a href="http://www.purevolume.com/yk2gonlineestrace">order estrace in gb</a>  <a href="http://www.purevolume.com/ncsxovernightclaritin">buy claritin in gb</a>  And still the men chatted pleasantly, and smiled.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/u4w3onlinesingulair">singulair in usa</a>  <a href="http://www.purevolume.com/78bocheapduphaston">cheap duphaston pills</a>  There was silence in the room while he ran his eye over three pages of typescript which Bond could see were headed with the blue and white cipher of the Colonial Office.   <a href="http://www.purevolume.com/riltovernightstromectol">order stromectol cheap</a>  As he turned it between his fingers, all the colours of the rainbow flashed back at him from its mesh of facets until his eye was tired with the dazzle.   I felt quite excited over it, and blurted out, Why, this beats even shorthand!  <a href="http://www.purevolume.com/m8dnonlineventolin">cheap ventolin in denmark</a>  <a href="http://www.purevolume.com/h9i1orderperiactin">buy periactin online no prescription</a>  <a href="http://www.purevolume.com/96yycheapamoxil">amoxil 30 mg</a>
+
*'''Expansió''': 3 ràdios miniPCI
70owsupp@gmail.com
+
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
# Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
  #    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
  #  according in how did you connect the cable to the miniPCI. Keep the
 +
  #  power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
#
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
  :foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
  add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
  # Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
  redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari