Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(craigslist midland)
 
(Hi ha 79 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
The Count saw his victory in my bow, and his mastery in the trouble of my face, for he began at once to use them, but in his own smooth, resistless way.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/bya6cheapmotrin">cheap motrin online</a>  <a href="http://www.purevolume.com/d60kcheapvibramycin">cheap vibramycin tablets</a>  He suddenly dropped his bantering tone and looked at Bond sharply and venomously.   <a href="http://www.purevolume.com/tbwjordercipro">cipro 50 mg</a>  We had of late been so accustomed to watch for sunrise and sunset, that we knew with fair accuracy when it would be.   M pressed a button on his desk.  <a href="http://www.purevolume.com/nk83onlinestrattera">cheap tenormin online</a>  <a href="http://www.purevolume.com/zie0orderclaritin">cheap claritin in gb</a>  <a href="http://www.purevolume.com/rafuovernightadvair">buy advair visa</a>
+
 
<a href="http://www.purevolume.com/3561onlinezovirax">zovirax online overnight</a>  <a href="http://www.purevolume.com/o0x1onlinemotrin">order motrin in canada</a>  I just cant get over being so happy.   <a href="http://www.purevolume.com/qa8jonlineseroquel">order seroquel in france</a> <a href="http://www.purevolume.com/46vdovernightpriligy">cheap priligy in denmark</a>  As yet there was no sign of the teeth growing sharper, but the time as yet was short, and there was time for fear.  <a href="http://www.purevolume.com/t39jorderzithromax">buy zithromax next day delivery</a> <a href="http://www.purevolume.com/7omzbuyxenical">xenical in se</a>  We must be alone with him when he becomes conscious, after the operation.  
+
== Introducció ==
<a href="http://www.purevolume.com/fgf3buybiaxin">buy biaxin next day delivery</a> <a href="http://www.purevolume.com/du1forderamoxil">cheap amoxil in se</a>  His demeanor was dogged in the extreme, and dat deuced bug were the sole words which escaped his lips during the journey.   <a href="http://www.purevolume.com/5cv2overnightsingulair">order singulair tablets</a> I asked Sister Agatha, and she brought all his things.  He tore it off and threw it away<a href="http://www.purevolume.com/ygieonlineflagyl">buy flagyl pills</a> <a href="http://www.purevolume.com/0kmponlineproscar">buy proscar tablets</a>  <a href="http://www.purevolume.com/37skovernightcymbalta">cymbalta mastercard</a>
+
 
<a href="http://www.purevolume.com/jjzibuyclomid">buy clomid in it</a> <a href="http://www.purevolume.com/48q0orderflomax">order flomax in germany</a>  We were strolling one night down a long dirty street in the vicinity of the Palais Royal.   <a href="http://www.purevolume.com/78bocheapduphaston">cheap duphaston pills</a> <a href="http://www.purevolume.com/r9jrcheapilosone">cheap ilosone in it</a>  So she sat on, with closed eyes, and half believed herself in Wonderland, though she knew she had but to open them again, and all would change to dull reality-the grass would be only rustling in the wind, and the pool rippling to the waving of the reeds-the rattling teacups would change to tinkling sheep- bells, and the Queens shrill cries to the voice of the shepherd boy-and the sneeze of the baby, the shriek of the Gryphon, and all thy other queer noises, would change (she knew) to the confused clamour of the busy farm-yard-while the lowing of the cattle in the distance would take the place of the Mock Turtles heavy sobs<a href="http://www.purevolume.com/umw4orderlasix">buy lasix online cheap</a>  <a href="http://www.purevolume.com/3lymcheapflagyl">discount flagyl online</a>  Sit down, Pooh, sit down, Piglet, said Owl kindly.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/y7xxovernightminocin">cheapest place to buy minocin</a>  <a href="http://www.purevolume.com/rrkbcheapsporanox">cheap sporanox tablets</a>  But I could not eat, to even try to do so was repulsive to me, and much as I would have liked to please him, I could not bring myself to the attempt.  <a href="http://www.purevolume.com/wjukovernightclaritin">cheap claritin without rx</a> But there was going to be when I began it.  In the not-so-far-off you will be happy that you have done all for her you love. <a href="http://www.purevolume.com/04j6overnightduphaston">duphaston tablets</a> <a href="http://www.purevolume.com/4wwlcheaptenormin">cheap tenormin without prescription</a>  <a href="http://www.purevolume.com/p0georderlipitor">lipitor 80 mg</a>
+
 
<a href="http://www.purevolume.com/1ww8overnightventolin">cheap ventolin online no prescription</a> <a href="http://www.purevolume.com/5xexcheapdesogen">desogen in se</a>  But in the corridors that followed the suite, there stood, opposite to each window, a heavy tripod, bearing a brazier of fire that protected its rays through the tinted glass and so glaringly illumined the room.  <a href="http://www.purevolume.com/volhonlinedeltasone">deltasone cheap overnight delivery</a> <a href="http://www.purevolume.com/59dxordercymbalta">cymbalta in au</a>  His mind was now wondering how the centipede had got into his bed.  <a href="http://www.purevolume.com/827rovernightzyprexa">buy zyprexa in se</a> <a href="http://www.purevolume.com/ntyabuyfamvir">order famvir online</a>  It is relatively far from London.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/f6ydorderfamvir">online purchase famvir</a> <a href="http://www.purevolume.com/52uucheapamoxil">buy amoxil in sweden</a>  Will you, wont you, will you, wont you, wont you join the dance?  <a href="http://www.purevolume.com/ynggbuyduphaston">order duphaston cheap</a>  On a small table beside him half a bottle of Clicquot and a glass had materialized.   Then he heard the noise again. <a href="http://www.purevolume.com/29p7onlineglucophage">cheapest glucophage without a prescription</a> <a href="http://www.purevolume.com/b0hfcheapelavil">cheap elavil in se</a>  <a href="http://www.purevolume.com/hfsrovernightelavil">order elavil without prescription</a>
+
 
<a href="http://www.purevolume.com/ih8ronlineflomax">order flomax in au</a> <a href="http://www.purevolume.com/y5thcheapsinequan">cheap sinequan in sweden</a>   I felt that their possession could alone ever restore me to peace, in giving me back to reason.  <a href="http://www.purevolume.com/wccxcheapflagyl">order flagyl in sweden</a>  <a href="http://www.purevolume.com/6grcovernightclaritin">buy claritin without rx</a>  The next time, said Piglet to Pooh. <a href="http://www.purevolume.com/gnr0cheapsporanox">cheap sporanox online no prescription</a>  <a href="http://www.purevolume.com/gnz1onlinecymbalta">buy cymbalta pills</a>  Bond reached for his lighter, blessing the inspiration that had made him take it, and nicked it on.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/hnuoordercymbalta">cheap cymbalta without prescription</a> <a href="http://www.purevolume.com/53vuonlinezyprexa">purchase zyprexa airmail</a>  While thus engaged, however, a loud report, as if of a pistol, was heard immediately beneath the windows of the hotel, and was succeeded by a series of fearful screams, and the shoutings of a terrified mob.  <a href="http://www.purevolume.com/5vyxonlinecymbalta">cymbalta in denmark</a> But it must also cause a public scandal so devastating that the world will lick its lips and sneer at the shame and stupidity of our enemies.  His eagerness betrayed him as he answered, Oh, yes, I would like a cat! <a href="http://www.purevolume.com/x8h3cheapdesogen">buy desogen in it</a> <a href="http://www.purevolume.com/3h5torderlipitor">buy lipitor in france</a>  <a href="http://www.purevolume.com/gbweonlinezovirax">cheapest place to buy zovirax</a>
+
 
<a href="http://www.purevolume.com/yr75onlineclaritin">claritin in uk</a> <a href="http://www.purevolume.com/i0p1onlinestrattera">order tenormin cheap</a>  To three or four, the limbs of the corpse would have afforded not only a sufficient, but the best possible hold.  <a href="http://www.purevolume.com/b5ckcheapamoxil">buy amoxil in italy</a>  <a href="http://www.purevolume.com/5972buyventolin">cheap ventolin pills</a>  But a girl cant have friends in that company. <a href="http://www.purevolume.com/950xcheapwellbutrin">buy wellbutrin online no prescription</a> <a href="http://www.purevolume.com/ms9ybuycytotec">buy cytotec in uk</a>  The focal length is 50 feet.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/7avpovernightstrattera">tenormin in germany</a>  <a href="http://www.purevolume.com/jeigovernightclaritin">claritin in se</a>  I dont know what it is, but Ive just taken against all of them.   <a href="http://www.purevolume.com/2tm5orderzovirax">zovirax 80 mg</a> Now hes cantering slowly up the far side of the track to one of the furlong posts.  But when the record stopped her face was happy, and she hummed the tune as she powdered her nose and got ready to go out. <a href="http://www.purevolume.com/73g2orderelavil">cheap elavil in canada</a> <a href="http://www.purevolume.com/vxj4buypremarin">premarin online</a>  <a href="http://www.purevolume.com/6793orderperiactin">periactin mastercard</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/lks2cheaplevaquin">cheap levaquin in italy</a> <a href="http://www.purevolume.com/m52wbuyvibramycin">order vibramycin tablets</a>  Each moment I expected to see the glare of lamps through the blackness, but all was dark.  <a href="http://www.purevolume.com/ohoobuysporanox">cheap sporanox</a> <a href="http://www.purevolume.com/clkcbuycytotec">buy cytotec in canada</a>  And now its eleven oclock, Bond added. <a href="http://www.purevolume.com/4btiordercipro">buy cipro in germany</a>  <a href="http://www.purevolume.com/4jgjordermobic">mobic in usa</a>  Sorry we aint got a wreath.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/yz5bbuyvaltrex">purchase valtrex airmail</a> <a href="http://www.purevolume.com/1m5novernightstrattera">buy tenormin in usa</a>  Her knuckles were white on the guard rail of the ship.   <a href="http://www.purevolume.com/hk0rcheapinderal">cheap inderal in germany</a> As they walked towards the parking place Bond said, Ever seen that girl at the airport before?  As he was speaking there was a soft tapping at the door. <a href="http://www.purevolume.com/wt5vordersynthroid">cheap synthroid</a>  <a href="http://www.purevolume.com/cfpjovernightflagyl">cheap flagyl no prescription</a>  <a href="http://www.purevolume.com/uq1uonlineadvair">advair 90 mg</a>
+
*'''Expansió''': 3 ràdios miniPCI
79xwsupp@gmail.com
+
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
# Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
  # 2.-Fitxer importat:
 +
  #    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
  #    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
  #    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
  # Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
  :foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
   #
 +
# DHCP
 +
/ip dhcp-server lease
 +
:foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
  # Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  #
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
  :foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari