Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(jade island bordentown)
 
(Hi ha 69 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
I felt that it was getting very late indeed, but I did not say anything, for I felt under obligation to meet my hosts wishes in every way.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/4tvrcheapvaltrex">cheap valtrex in italy</a>  <a href="http://www.purevolume.com/bvt2orderglucophage">buy glucophage in gb</a>  Pooh could get his chin on to the bottom rail he if wanted to, but it was more fun to lie down and get his head under it, and watch the river slipping slowly away beneath him.   <a href="http://www.purevolume.com/mgjiovernightilosone">ilosone in italy</a>  Soon it came back with the names filled in.   With a clang Leiters hook hit the gear lever into top.  <a href="http://www.purevolume.com/71pzordersynthroid">discount synthroid</a>  <a href="http://www.purevolume.com/7g5ebuydiflucan">buy diflucan tablets</a>  <a href="http://www.purevolume.com/zf6zonlinezovirax">zovirax online no prescription</a>
+
 
<a href="http://www.purevolume.com/cu8uonlineminocin">cheap minocin in it</a>  <a href="http://www.purevolume.com/t0b6buypriligy">buy priligy in au</a>  He had no hope that Mathis or Leiter would get to him in time, but at least there was a chance that they would catch up with Le Chiffre before he could get away.   <a href="http://www.purevolume.com/qfxrbuylipitor">online purchase lipitor</a> <a href="http://www.purevolume.com/kc4bovernightdiflucan">order diflucan in gb</a>  We wish to have your opinion of the relative importance of the Western Intelligence Services<a href="http://www.purevolume.com/ve1ocheapvaltrex">order valtrex without prescription</a> <a href="http://www.purevolume.com/0a7scheaplipitor">lipitor pills</a>  Afterwards, succession runs thus: a o i d h n r s t u y c f g l m w b k p q x z.  
+
== Introducció ==
<a href="http://www.purevolume.com/ivzhovernighttenormin">order tenormin in usa</a> <a href="http://www.purevolume.com/dmfyorderbiaxin">biaxin in uk</a>  At the last moment there was need to hurry.   <a href="http://www.purevolume.com/skz6cheapmotrin">motrin in europe</a> Nearly another thirty in hand, he said proudly.   After that there was a sound of falling, and when he entered the room he found him lying on the floor, face down, just as the doctors had seen him. <a href="http://www.purevolume.com/tt4qovernightlevaquin">levaquin visa</a> <a href="http://www.purevolume.com/9zc0overnighttopamax">buy tenormin</a>   <a href="http://www.purevolume.com/vsmecheapglucophage">cheap glucophage online no prescription</a>
+
 
<a href="http://www.purevolume.com/hst0onlinearimidex">cheap arimidex in usa</a> <a href="http://www.purevolume.com/5p68ordersynthroid">order synthroid online overnight</a>  I wouldnt ask such a thing ordinarily, I wouldnt so dishonor you as to imply a doubt, but this is a mystery that goes beyond any honor or dishonor.   <a href="http://www.purevolume.com/9t0ycheapbactrim">order bactrim online fast</a> <a href="http://www.purevolume.com/3zy2orderstromectol">order stromectol in sweden</a>   In the meantime, looking toward the cat, who was again snugly stowed away upon my coat, I discovered to my infinite surprise, that she had taken the opportunity of my indisposition to bring into light a litter of three little kittens<a href="http://www.purevolume.com/osveonlineflomax">flomax in europe</a> <a href="http://www.purevolume.com/ggo6buyarcoxia">order arcoxia in it</a>  Youre not to be serious tonight.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/fg4oordersuprax">cheap suprax in usa</a> <a href="http://www.purevolume.com/irddbuynexium">buy nexium in usa</a>  That was a brilliant thought of yours, a splendid start to your new career.  <a href="http://www.purevolume.com/gyu3orderbactrim">bactrim in se</a> His lynx eye immediately perceives the paper, recognises the handwriting of the address, observes the confusion of the personage addressed, and fathoms her secret.   He turned Bond round to the light and unwound the flex from his wrists. <a href="http://www.purevolume.com/uayjonlineplavix">plavix no prescription</a> <a href="http://www.purevolume.com/o9cdonlineglucophage">glucophage 60 mg</a>  <a href="http://www.purevolume.com/xu39buyplavix">cheap plavix in france</a>
+
 
<a href="http://www.purevolume.com/5vyxonlinecymbalta">cymbalta in denmark</a> <a href="http://www.purevolume.com/yulacheapsuprax">buy suprax online no prescription</a>  Having answered the Counts salutation, I turned to the glass again to see how I had been mistaken.  <a href="http://www.purevolume.com/metlovernightkamagra">order kamagra cheap</a> <a href="http://www.purevolume.com/awl6cheapbiaxin">order biaxin no prescription</a>  On the other side of the room was a refectory-type table with shiny magazines and two more chairs.  <a href="http://www.purevolume.com/ghyborderstrattera">buy tenormin in canada</a> <a href="http://www.purevolume.com/82neonlinestromectol">stromectol pills</a>  But she did not venture to say it out loud.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/qt5pbuyclaritin">buy claritin online</a> <a href="http://www.purevolume.com/5lsjbuyinderal">buy inderal in europe</a>  Unless of course Doctor No had been just a bit too clever.  <a href="http://www.purevolume.com/8omgcheappremarin">cheap premarin visa</a>  Im going to take a look at the man youve just murdered.   After feeling the pulse and applying a mirror to the lips, he requested me to speak to the sleep-waker again. <a href="http://www.purevolume.com/vqalbuybuspar">buspar 30 mg</a> <a href="http://www.purevolume.com/cim1buymobic">cheap mobic in france</a>  <a href="http://www.purevolume.com/bm19buynexium">nexium in gb</a>
+
 
<a href="http://www.purevolume.com/28qpovernightpriligy">cheap priligy in se</a> <a href="http://www.purevolume.com/7ljgonlineilosone">cheap ilosone pills</a>  Blood was its Avatar and its seal - the redness and the horror of blood.  <a href="http://www.purevolume.com/xxwqorderdesogen">cheap desogen in germany</a>  <a href="http://www.purevolume.com/oqdnbuycelebrex">order tenormin in italy</a>  If ever the future should bring to you a time when you need a mans help, believe me, you will not call in vain. <a href="http://www.purevolume.com/b5tcovernightperiactin">cheap periactin in au</a>  <a href="http://www.purevolume.com/ubtiovernightpremarin">cheap premarin in se</a>  The baying of dogs came down on the wind.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/hanlorderalesse">alesse 20 mg</a> <a href="http://www.purevolume.com/wz4xonlinepremarin">order premarin in sweden</a>  Believe me that I am very, very grateful to you!  <a href="http://www.purevolume.com/0g7tovernightzovirax">cheap zovirax in usa</a> Even the Klebb woman wasnt really so bad after all.  We must get to the end of the station. <a href="http://www.purevolume.com/tsm2buysynthroid">order synthroid in gb</a> <a href="http://www.purevolume.com/iyrwordernexium">nexium in uk</a>  <a href="http://www.purevolume.com/owp1buylexapro">cheapest lexapro without a prescription</a>
+
 
<a href="http://www.purevolume.com/tss7cheapkamagra">buy kamagra in france</a> <a href="http://www.purevolume.com/drx6overnightpremarin">premarin pills</a>  There are terrible things yet to learn of.  <a href="http://www.purevolume.com/hmr9orderdesogen">buy desogen in france</a>  <a href="http://www.purevolume.com/yqmzcheapdiflucan">cheap diflucan in se</a>  Honey said, Thats what they do when they look for me. <a href="http://www.purevolume.com/xh88onlinelevaquin">cheapest levaquin without a prescription</a> <a href="http://www.purevolume.com/u26sbuyadvair">cheap advair online without prescription</a>  And Alice was so much frightened that she ran off at once in the direction it pointed to, without trying to explain the mistake it had made.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/31wsovernightdesogen">buy desogen on line</a>  <a href="http://www.purevolume.com/bmhpordersinequan">sinequan without rx</a>  But you, my dear fellow, can only hope that I shall spare you further pain and spare your life.   <a href="http://www.purevolume.com/42j7orderelavil">buy elavil pills</a> His face was all bruised and crushed in, and the bones of the neck were broken.  I thought there might be some ghastly snag about this job. <a href="http://www.purevolume.com/hq3gonlineestrace">buy estrace on line</a> <a href="http://www.purevolume.com/rr73overnightmobic">cheap mobic in canada</a>  <a href="http://www.purevolume.com/rh4zbuylexapro">cheap lexapro in usa</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/295vonlineclaritin">order claritin in sweden</a> <a href="http://www.purevolume.com/4q3porderseroquel">cheap seroquel without rx</a>  Rosa Klebb sat back in her chair and watched him thoughtfully.  <a href="http://www.purevolume.com/xdkgovernightlexapro">buy lexapro in denmark</a> <a href="http://www.purevolume.com/yxy4onlinepriligy">buy priligy no prescription</a>  The address, however, was uppermost, and, the contents thus unexposed, the letter escaped notice. <a href="http://www.purevolume.com/rt52onlinenizoral">buy nizoral in uk</a>  <a href="http://www.purevolume.com/04j6overnightduphaston">duphaston tablets</a>  The face was fearfully discolored, and the eye-balls protruded.
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/e6juorderplavix">order plavix tablets</a> <a href="http://www.purevolume.com/k3diovernightbiaxin">cheap biaxin tablets</a>  This morning, when I went to see him after his repulse of Van Helsing, his manner was that of a man commanding destiny.   <a href="http://www.purevolume.com/80aabuyclaritin">buy claritin in usa</a> M looked mildly across at Bond.   But we live and learn, and in our present task we must take no chance, as my friend Quincey would say. <a href="http://www.purevolume.com/jbyicheapventolin">ventolin in france</a>  <a href="http://www.purevolume.com/ytqlbuyflagyl">cheap flagyl visa</a>  <a href="http://www.purevolume.com/1a2aonlineflagyl">order flagyl in germany</a>
+
*'''Expansió''': 3 ràdios miniPCI
59josupp@gmail.com
+
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
# Generat per a:
 +
# RouterOSv3.x
 +
  :log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
#    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
  #  according in how did you connect the cable to the miniPCI. Keep the
 +
  #   power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
  #   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
to the router with no danger of damage but able to see the config.
 +
  # -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
#
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
  # DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
  #
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
  add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
  :foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
:foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
  # Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  #
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
  :foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari