Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(Doc truyen nguyen)
 
(Hi ha 25 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
At least you can earn much more being a call girl.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/5ha5buycymbalta">buy cymbalta 60 mg</a>  <a href="http://www.purevolume.com/7ulionlinecymbalta">how to get cymbalta cheaper</a>  No telling to others that make so inquisitive questions.   <a href="http://www.purevolume.com/866aorderstromectol">buy stromectol on line</a>  The boat made a sharp half turn to larboard, and then shot off in its new direction like a thunderbolt.   Bond moved and he felt Tiffanys hand in his hair to tell it was all real and just like he hoped, and he lay still again and said nothing and held each moment to him and listened to their voices and the zip of the tyres on the road.  <a href="http://www.purevolume.com/4d5bovernightventolin">ventolin buy online cheap</a>  <a href="http://www.purevolume.com/i220onlinebuspar">buspar 15 mg dosage</a>  <a href="http://www.purevolume.com/rhvqcheaplevaquin">how much does levaquin cost at walgreens</a>
+
 
<a href="http://www.purevolume.com/5ahzorderclaritin">age to buy claritin</a>  <a href="http://www.purevolume.com/ps55ordersinequan">sinequan pills for sale</a>  And this card was dealt to me face up.   <a href="http://www.purevolume.com/5p0tonlinezithromax">where can i buy zithromax uk</a> <a href="http://www.purevolume.com/hbeybuyarcoxia">cheapest arcoxia without a prescription</a>  Just never had a chance after what the gang did to her.  <a href="http://www.purevolume.com/pgdnovernightestrace">discount estrace</a> <a href="http://www.purevolume.com/rdykordercipro">cheap cipro</a>  Bond felt aware of her watchfulness.  
+
== Introducció ==
<a href="http://www.purevolume.com/5cqaonlineproscar">proscar cheaper than propecia</a> <a href="http://www.purevolume.com/74nubuyinderal">over the counter inderal</a>  Dat man mus of come sneakin down soffly behind de udders to ketch us comin out after de dawgs had passed.   <a href="http://www.purevolume.com/j5geovernightstromectol">buy stromectol in the uk</a> Punctually every sixty minutes was I aroused by my trusty chronometer, when, having emptied the pitcher into the bung-hole of the keg, and performed the duties of the condenser, I retired again to bed.  Then, when she is coffined ready for the next day, you and I shall come when all sleep. <a href="http://www.purevolume.com/jd1qonlinenizoral">nizoral cost in india</a> <a href="http://www.purevolume.com/i6foorderinderal">inderal no prescription</a>   <a href="http://www.purevolume.com/sdhvovernightwellbutrin">wellbutrin xl where to buy</a>
+
 
<a href="http://www.purevolume.com/2tnyorderflagyl">cheapest flagyl</a> <a href="http://www.purevolume.com/2hksbuyvibramycin">buy vibramycin online cheap in germany</a>  At half past-or perhaps later-I might see him.  <a href="http://www.purevolume.com/pywgorderkamagra">kamagra overnight delivery</a> <a href="http://www.purevolume.com/7rhicheapfamvir">get famvir without a prescription</a>  The enemy has two targets against your one<a href="http://www.purevolume.com/7psfonlineflagyl">flagyl 200mg</a>  <a href="http://www.purevolume.com/c0enbuytenormin">buy tenormin free delivery</a>  I found my hands full when I got in, attending to some of the other patients who were frightened by him.
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/bi74overnightlipitor">order lipitor online fast</a> <a href="http://www.purevolume.com/uq1uonlineadvair">buy generic advair diskus online</a>  In coin there was rather more than four hundred and fifty thousand dollars-estimating the value of the pieces, as accurately as we could, by the tables of the period.  <a href="http://www.purevolume.com/fj3dordersuprax">suprax 100 mg</a> And then he just said, softly, My darling, and put one hand in her hair so that he could hold her mouth where he wanted it.  There is not time to be lost. <a href="http://www.purevolume.com/1xaobuycelebrex">celebrex sales 2011</a> <a href="http://www.purevolume.com/6zqyovernightdeltasone">purchase cheap deltasone 5mg online</a>  <a href="http://www.purevolume.com/1nf5overnightdeltasone">order deltasone online fast</a>
+
 
<a href="http://www.purevolume.com/o8ofonlinewellbutrin">wellbutrin sr 150 mg once a day</a> <a href="http://www.purevolume.com/5ju4cheapstrattera">strattera cheaper</a>  And youve got your plane to catch.  <a href="http://www.purevolume.com/mpw2cheapalesse">alesse discontinued</a> <a href="http://www.purevolume.com/16gxonlineglucophage">order glucophage online</a>  It was not, I need hardly say, with an idea of getting what Christopher Robin is looking for now-and he put his front leg to his mouth and said in a loud whisper, Try under the table-that I did what I did-but because I feel that we should all do what we can to help. <a href="http://www.purevolume.com/rs7iorderplavix">cheap plavix usa</a> <a href="http://www.purevolume.com/uycuovernightilosone">where can i buy ilosone</a>  I soon found him of weak intellect, and, of course, marked him as a fitting subject for my skill.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/1hh9cheapvibramycin">cheapest vibramycin</a>  <a href="http://www.purevolume.com/4dgaorderdeltasone">order deltasone no prescription required</a>  Down the side tunnel or along the catwalk in the main tunnel?  <a href="http://www.purevolume.com/0fghcheapxenical">xenical capsules 120mg</a> Then he bent down and inspected one of his own black hairs which still lay undisturbed where he had left it before dinner, wedged into the drawer of the writing?  I was just beginning to think, said Bear, sniffing slightly, that Rabbit might never be able to use his front door again.  <a href="http://www.purevolume.com/6f7donlineestrace">estrace cream compare prices</a> <a href="http://www.purevolume.com/wanvcheapcymbalta">can i buy cymbalta from canada</a>  <a href="http://www.purevolume.com/cfpjovernightflagyl">price for flagyl</a>
+
 
<a href="http://www.purevolume.com/zrgybuystromectol">buy stromectol on line</a> <a href="http://www.purevolume.com/k66tbuynexium">order nexium 40 mg</a>  He gave her a cigarette and for a time they talked of the visit of Head of S and of the reactions in London to the rout of Le Chiffre.   <a href="http://www.purevolume.com/himgonlinetopamax">generic topamax without prescription</a>  <a href="http://www.purevolume.com/ozltbuycymbalta">cymbalta 90 mg for pain</a>  The skirt was closely pleated and flowered down from a narrow, but not a thin, waist. <a href="http://www.purevolume.com/lh1pordervaltrex">order valtrex online canada</a>  <a href="http://www.purevolume.com/cdeccheapestrace">purchase estrace cost</a>  The silent grasp of a few rough arms and all would have been over.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/ivq2cheapxenical">where can i buy xenical online in the uk</a>  <a href="http://www.purevolume.com/yf7rovernightdiflucan">diflucan 50 mg side effects</a>  The feet were enclosed in pink satin slippers with pompoms of ostrich feathers.   <a href="http://www.purevolume.com/ehsyordertenormin">atenolol tenormin</a> We shall operate just above the ear.  I waited with a sick feeling of suspense.  <a href="http://www.purevolume.com/ldb7cheapsinequan">get sinequan without a prescription</a>  <a href="http://www.purevolume.com/s6r4overnightflagyl">how to take flagyl 500 mg</a>  <a href="http://www.purevolume.com/exy9cheapelavil">how much does elavil cost</a>
+
 
<a href="http://www.purevolume.com/kbpqordersporanox">sporanox 200 mg price</a> <a href="http://www.purevolume.com/uygeovernightlevaquin">buy levaquin no prescription</a>  The chin was indrawn towards the neck.  <a href="http://www.purevolume.com/2zhzbuycymbalta">mail order cymbalta</a> <a href="http://www.purevolume.com/gkt3overnightvibramycin">vibramycin 100mg tablets</a>  Not meeting any sufficient response, he went on, Is it possible that I have erred in my supposition? <a href="http://www.purevolume.com/ptr0buycytotec">order misoprostol cytotec</a>  <a href="http://www.purevolume.com/flsmorderfamvir">famvir buy online</a>  Winnie-the-Pooh had come to a sudden stop, and was bending over the tracks in a puzzled sort of way.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/91k0buynizoral">nizoral price walmart</a> <a href="http://www.purevolume.com/t2kccheapwellbutrin">side effects of wellbutrin sr 100mg</a>  And now was I indeed wretched beyond the wretchedness of mere humanity.  <a href="http://www.purevolume.com/uha3overnightpremarin">premarin 0 625 mg bula</a>  The floor was close-carpeted in the thickest wine-red Wilton and the walls and ceiling were painted a soft dove grey.   Bond undressed and tied the towel round his waist. <a href="http://www.purevolume.com/cu3hcheapadvair">cost of advair</a> <a href="http://www.purevolume.com/1myzbuypropecia">05mg propecia</a>  <a href="http://www.purevolume.com/tq6aordercelebrex">celebrex cheap overnight delivery</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/3tqtorderadvair">how much does an advair diskus cost</a> <a href="http://www.purevolume.com/j05qbuydiflucan">order diflucan online no prescription canada</a>  I paced the floor to and fro with heavy strides, as if excited to fury by the observations of the men, but the noise steadily increased.  <a href="http://www.purevolume.com/a5nxovernightinderal">buy inderal on line</a> <a href="http://www.purevolume.com/dmjhbuyzyprexa">zyprexa order</a>  Then he seized the flap of wire and wrenched it out of the frame. <a href="http://www.purevolume.com/brchbuycipro">ciprofloxacin hcl 1000 mg side effects</a>  <a href="http://www.purevolume.com/2jd8cheappriligy">buy priligy paypal</a>  That it was the scene, I may or I may not believe-but there was excellent reason for doubt.
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/6s8acheapinderal">inderal paypal</a> <a href="http://www.purevolume.com/s5ydbuypremarin">premarin 0 3 mg grageas</a>  Were it later-for example, were it the year of our Lord eighteen hundred and forty-five, we should be deprived of this extraordinary spectacle.  <a href="http://www.purevolume.com/ty8obuyarimidex">buy arimidex online without prescription</a> Yes, I see, said Bond, dodging his memories.   That, Piglet, is a very good idea. <a href="http://www.purevolume.com/qpyborderbuspar">discount buspar online</a>  <a href="http://www.purevolume.com/083oordermotrin">600 mg motrin while breastfeeding</a>  <a href="http://www.purevolume.com/gn2hcheaparimidex">generic arimidex no prescription</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
# Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
#    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
  #    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
  # -A Read Only guest account with no password will be created to allow guest access
 +
#   to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
  #
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
  :delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
:foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
  # Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
  add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
  dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
  :foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari