Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(adaptive scissors)
 
(Hi ha 4 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
−
Bond concluded the story he had been telling between mouthfuls.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
−
<a href="http://www.purevolume.com/bd49onlinelasix">dosage of lasix</a>  <a href="http://www.purevolume.com/zhgpbuyglucophage">purchase buy glucophage online</a>  He, too, have child brain, and it is of the child to do what he have done.   <a href="http://www.purevolume.com/c7xtcheappropecia">propecia price walgreens</a>  Sardis is just over the way.   It annoyed Bond that they didnt worry about him, that they knew he was utterly in their power.  <a href="http://www.purevolume.com/gfdqorderpremarin">cost of premarin cream</a> <a href="http://www.purevolume.com/us1aonlineflagyl">where to buy flagyl in canada</a>  <a href="http://www.purevolume.com/cd84buyflagyl">metronidazole flagyl 500 mg oral tablet</a>
+
 
−
<a href="http://www.purevolume.com/e61fovernightxenical">xenical order online uk</a> <a href="http://www.purevolume.com/yb6mordernizoral">nizoral anti dandruff shampoo price</a>  Her voice had a wry undertone.  <a href="http://www.purevolume.com/0i9lbuytopamax">topamax with no prescription</a> <a href="http://www.purevolume.com/78v5buypriligy">purchase buy priligy online</a>  Now suppose that you were, in truth, the owner of that house, and could not still get in.  <a href="http://www.purevolume.com/qhvwbuyzithromax">zithromax z pak 250 mg tablet</a> <a href="http://www.purevolume.com/nonjcheapbactrim">bactrim ds price india</a>  Was it not Socrates who said that the statuary found his statue in the block of marble?
+
== Introducció ==
−
<a href="http://www.purevolume.com/uldscheaptopamax">800 mg topamax</a> <a href="http://www.purevolume.com/emttorderflomax">purchase discount flomax</a>  Ainsworth, with the seamen, was surprised at their apparent want of altitude when viewed from the car, the tendency of great elevation in a balloon being to reduce inequalities of the surface below, to nearly a dead level.   <a href="http://www.purevolume.com/173echeapestrace">estrace cream without prescription</a> I think the bees suspect something!   I wish to describe, but am disheartened by the difficulty of description, and hesitate between detail and generality.  <a href="http://www.purevolume.com/zzdxcheapsuprax">suprax tablets</a> <a href="http://www.purevolume.com/koz2onlinevaltrex">for sale valtrex</a>  <a href="http://www.purevolume.com/c7zzorderpriligy">buying priligy without a script</a>
+
 
−
<a href="http://www.purevolume.com/yz5bbuyvaltrex">buy valacyclovir valtrex</a> <a href="http://www.purevolume.com/t9aibuydesogen">cheap desogen uk overnight</a>  He restored the sheet to its place, and we came away.   <a href="http://www.purevolume.com/swo5cheapadvair">advair diskus canada price</a>  <a href="http://www.purevolume.com/rdykordercipro">ciprofloxacin hcl 250 mg uses</a>  But he is growing, and some things that were childish at the first are now of mans stature.  <a href="http://www.purevolume.com/8yexorderpriligy">buy priligy online usa</a> <a href="http://www.purevolume.com/pm6donlinemobic">where can i buy mobic</a>  And two days later Rabbit happened to meet Eeyore in the Forest.
+
Les característiques es poden trobar a la web de microtik:
−
<a href="http://www.purevolume.com/ebigbuydeltasone">purchase cheap deltasone 5mg no prescription required</a> <a href="http://www.purevolume.com/u2f5cheapduphaston">duphaston purchase</a>  Bond flattened himself against the rock and warily inched his head round the corner.  <a href="http://www.purevolume.com/d162cheapsuprax">cheapest suprax</a> I couldnt cope in badinage with the worthy Thomas, but I thought I knew a surer way to his heart, so I said, Now, Mr.  If the murder had been committed at the Barriere du Roule, there would have been no necessity for any such arrangement.  <a href="http://www.purevolume.com/5d3xcheaptopamax">for sale topamax</a> <a href="http://www.purevolume.com/sx8iorderilosone">i want to order ilosone without a perscription</a>  <a href="http://www.purevolume.com/wnxicheapcymbalta">price cymbalta without insurance</a>
+
 
−
<a href="http://www.purevolume.com/mhawovernightfamvir">buying famvir</a> <a href="http://www.purevolume.com/tjuybuysynthroid">synthroid price comparison</a>  Its a very funny thing, said Bear, but there seem to be two animals now.  <a href="http://www.purevolume.com/0lvuovernightkamagra">kamagra oral</a> <a href="http://www.purevolume.com/msm2cheaplipitor">20 mg lipitor price</a>  There was a full moonlight, and I could see that the noise was made by a great bat, which wheeled around, doubtless attracted by the light, although so dim, and every now and again struck the window with its wings. <a href="http://www.purevolume.com/02akovernightadvair">buy advair inhaler online</a> <a href="http://www.purevolume.com/mzkmcheapmobic">mobic 30 mg daily</a>  The girl held the receiver away from her face.
+
http://www.routerboard.com/comparison.html
−
<a href="http://www.purevolume.com/ef4yonlinedesogen">purchase desogen</a>  <a href="http://www.purevolume.com/ud1bbuyflomax">flomax on line without prescription</a>  I expected to see him in some shape go back to Carfax, but he evidently sought some other lair.   <a href="http://www.purevolume.com/q975orderestrace">generic estrace cream cost</a> Safety and the assurance of safety are things of the past.  Inside, the clanking of the conveyor-belt over its rollers was deafening, but there were dim inspection lights in the stone ceiling of the tunnel and a narrow catwalk that stretched away into the mountain alongside the hurrying river of dust. <a href="http://www.purevolume.com/jce6onlinesynthroid">price of synthroid without insurance</a> <a href="http://www.purevolume.com/4itjonlineproscar">discount proscar</a>  <a href="http://www.purevolume.com/so2xcheapcipro">cipro ip online services</a>
+
 
−
<a href="http://www.purevolume.com/dyj0onlineglucophage">discount glucophage</a> <a href="http://www.purevolume.com/ozwwordernexium">nexium price walgreens</a>  At first, some effort was needed, and he had to make many passes.   <a href="http://www.purevolume.com/onocovernightzyprexa">purchase zyprexa airmail</a>  <a href="http://www.purevolume.com/vkuqorderkamagra">cheap kamagra for sale uk</a>  If only it would get Wint and Kidd and catch the paint on the Pullman and fire the wood in the tender of The Cannon-ball and finish off the gangsters box of toys! <a href="http://www.purevolume.com/j5b9overnightbactrim">bactrim walmart</a>  <a href="http://www.purevolume.com/ur6sovernightstromectol">for sale stromectol</a>  They were out of the snow now, but it was very cold, and to keep themselves warm they sang Poohs song right through six times, Piglet doing the tiddely-poms and Pooh doing the rest of it, and both of them thumping on the top of the gate with pieces of stick at the proper places.  
+
Feu clic a la fletxa cap avall on posa '''More'''
−
<a href="http://www.purevolume.com/ar9monlinesuprax">suprax 400 mg single dose</a> <a href="http://www.purevolume.com/gjv0cheapdiflucan">price of diflucan without insurance</a>  She clocked a hundred and twenty-seven and that beach surface isnt any too hot.  <a href="http://www.purevolume.com/wds0buycymbalta">is cymbalta an over the counter drug</a> When he did slide in through the window, though it was shut, and did not even knock, I got mad with him.  A house cannot be made habitable in a day, and after all, how few days go to make up a century. <a href="http://www.purevolume.com/k36vonlineperiactin">periactin weight gain buy online</a> <a href="http://www.purevolume.com/e61fovernightxenical">venta de xenical en costa rica</a>  <a href="http://www.purevolume.com/ccgkcheappropecia">propecia order uk</a>
+
 
−
<a href="http://www.purevolume.com/feqyovernightalesse">where can i buy alesse</a> <a href="http://www.purevolume.com/moo9cheapkamagra">kamagra oral jelly 50mg</a>  He took the two steps back to his chair and slowly turned round as if to sit down.  <a href="http://www.purevolume.com/elwxonlineclomid">cheap clomid buy now online</a>  <a href="http://www.purevolume.com/tgonovernightbactrim">bactrim doxycycline</a>  Den mos likely de boat come wit a dinghy an take de men and dogs off. <a href="http://www.purevolume.com/707scheapflagyl">400mg flagyl side effects</a> <a href="http://www.purevolume.com/f53ocheapstromectol">best buy for stromectol</a>  I descended, minding carefully where I went for the stairs were dark, being only lit by loopholes in the heavy masonry.
+
*'''CPU''': Atheros AR7161 680MHz
−
<a href="http://www.purevolume.com/dyj0onlineglucophage">glucophage 10 mg</a>  <a href="http://www.purevolume.com/z3cmbuylasix">lasix special 500 mg</a>  Instead he pressed a switch on the big intercom on his desk.   <a href="http://www.purevolume.com/5bbyonlineduphaston">cheap duphaston buy now online</a> The girl struggled like an eel, her teeth clenched on her lower lip.  When he had gone she leant over so that her hair brushed his ear and said softly. <a href="http://www.purevolume.com/ivf2onlineproscar">proscar cost canada</a> <a href="http://www.purevolume.com/m0nponlinemotrin">800 motrin</a>  <a href="http://www.purevolume.com/swo5cheapadvair">cheap advair</a>
+
*'''Memory''': 128Mb
−
<a href="http://www.purevolume.com/5abmbuyplavix">cheapest place to buy plavix</a> <a href="http://www.purevolume.com/b2n6buynolvadex">how many mg of nolvadex</a>  The fact that this spy was decorated with the C.   <a href="http://www.purevolume.com/kfj0onlinevaltrex">costco valtrex generic</a> <a href="http://www.purevolume.com/agb0buylasix">lasix price at walmart</a>  In the possibility of any improvement, properly so called, being effected by man himself in the general condition of man, he had (I am sorry to confess it) little faith. <a href="http://www.purevolume.com/p1s9overnightduphaston">buying duphaston without a script</a>  <a href="http://www.purevolume.com/8t5oorderventolin">buy on line ventolin cheap</a>  The thin smile creased and vanished.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
−
<a href="http://www.purevolume.com/3ch3buyglucophage">glucophage 20 mg</a>  <a href="http://www.purevolume.com/k7ckordersuprax">cheapest suprax without a prescription</a>  Pooh began to feel a little more comfortable, because when you are a Bear of Very Little Brain, and you Think of Things, you find sometimes that a Thing which seemed very Thingish inside you is quite different when it gets out into the open and has other people looking at it.   <a href="http://www.purevolume.com/xyd8overnighttopamax">100 mg topamax pregnancy</a>  Oh, gigantic paradox, too utterly monstrous for solution!  In the heart of Venice could I have erected a better?  <a href="http://www.purevolume.com/vmcyovernightperiactin">periactin cheap overnight delivery</a>  <a href="http://www.purevolume.com/fw87buynexium">40 mg nexium vs prilosec</a>  <a href="http://www.purevolume.com/94tbonlineperiactin">where can i buy periactin in the uk</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
# 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
  #  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#   to the router with no danger of damage but able to see the config.
 +
  # -Be sure that all packages are activated.
 +
  # -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
#
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
  #
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
  :foreach i in [/ip address find interface=wLan/Lan] \
 +
  do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
  :foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
:foreach i in [find comment=""] do={remove $i;}
 +
  :delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
  # Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
/ip firewall nat
 +
  add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
  / routing filter
 +
  add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
  redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 18:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik: 

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple: 

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a: 

http://guifi.net/guifi/device/13371/view/unsolclic

# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Obtingut de «http://ca.wiki.guifi.net/w/index.php?title=Mikrotik_RouterBoard_433&oldid=3733»
Eines de l'usuari