Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(pamana by jose corazon de jesus)
 
(Hi ha 97 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
Look here, old fellow, said Morris, it is a capital idea to have all ready in case we want to go horse backing, but dont you think that one of your snappy carriages with its heraldic adornments in a byway of Walworth or Mile End would attract too much attention for our purpose?
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/np04onlinealesse">buy alesse in germany</a> <a href="http://www.purevolume.com/c7kfcheapseroquel">discount seroquel online</a>  But I could not eat, to even try to do so was repulsive to me, and much as I would have liked to please him, I could not bring myself to the attempt.   <a href="http://www.purevolume.com/04ymonlinesinequan">buy sinequan tablets</a>  If there was one thing Bond couldnt stand it was the sound of his boots being licked.  Her appearance, wholesome, bosomy, eager, was almost excessively gracious.  <a href="http://www.purevolume.com/92vbbuypremarin">cheap premarin online</a>  <a href="http://www.purevolume.com/heiwonlinelasix">cheap lasix online no prescription</a>  <a href="http://www.purevolume.com/yia3cheapzyprexa">cheap zyprexa in europe</a>
+
 
<a href="http://www.purevolume.com/ue3ionlinebiaxin">buy cheap biaxin</a>  <a href="http://www.purevolume.com/8q30overnightnolvadex">buy nolvadex in gb</a>  And being now Completely Unsettled, he said very quickly and squeakily: This is a trap for Poohs, and Im waiting to fall in it, ho-ho, whats all this, and then I say ho-ho again.   <a href="http://www.purevolume.com/b8xlbuycelebrex">order tenormin in uk</a>  <a href="http://www.purevolume.com/bmhpordersinequan">sinequan without rx</a>  Itll break up a beautiful friendship with my girl Im afraid<a href="http://www.purevolume.com/bys9buylipitor">lipitor visa</a> <a href="http://www.purevolume.com/yxy4onlinepriligy">buy priligy no prescription</a>  Its much better than mine, said Pooh admiringly, and he really thought it is.
+
== Introducció ==
<a href="http://www.purevolume.com/snlvcheapcipro">order cipro tablets</a> <a href="http://www.purevolume.com/umaubuystrattera">order tenormin in canada</a>  At the back of Bonds mind was the urgent necessity to get his hands on some kind of weapon-a pair of scissors would be better than nothing.   <a href="http://www.purevolume.com/pdvocheapsynthroid">synthroid 100 mg</a> The first half-dozen of them are personal to me, and they will not horrify you.   Mines a sort of greyish one, said Piglet, not daring to lean too far over in case he fell in. <a href="http://www.purevolume.com/m7ofovernightfamvir">buy famvir online</a> <a href="http://www.purevolume.com/68h8onlinebactrim">buy bactrim visa</a>  <a href="http://www.purevolume.com/2laxcheaplexapro">buying lexapro online</a>
+
 
<a href="http://www.purevolume.com/vgedcheapadvair">cheapest place to buy advair</a> <a href="http://www.purevolume.com/f9qoonlineproscar">proscar 60 mg</a>  Why not advance science in its most difficult and vital aspect, the knowledge of the brain?  <a href="http://www.purevolume.com/kzgpcheapadvair">buy advair in au</a> <a href="http://www.purevolume.com/bo10overnightnexium">buy nexium in europe</a>  What, of itself, would be no evidence of identity, becomes through its corroborative position, proof most sure. <a href="http://www.purevolume.com/0yw0ordersingulair">singulair 70 mg</a> <a href="http://www.purevolume.com/8r9dbuywellbutrin">order wellbutrin in uk</a>   I could hear his voice in the hall, asking the way to the nearest telegraph office.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/uup8buydesogen">order desogen tablets</a> <a href="http://www.purevolume.com/7rcgovernighttenormin">cheap tenormin in denmark</a>   Eeyore took down his right hoof from his right ear, turned round, and with great difficulty put up his left hoof.   <a href="http://www.purevolume.com/nq9sovernightalesse">cheap alesse in sweden</a> She nodded, not looking at him.   The skull was shaven clean and the tight white skin glittered in the light of the central chandelier<a href="http://www.purevolume.com/pys2overnightsporanox">cheap sporanox in au</a>  <a href="http://www.purevolume.com/rdxybuyarimidex">cheapest place to buy arimidex</a>  <a href="http://www.purevolume.com/1yo8orderstromectol">buy stromectol online cheap</a>
+
 
<a href="http://www.purevolume.com/iy9morderzovirax">cheap zovirax without rx</a> <a href="http://www.purevolume.com/tyadcheapbactrim">buy bactrim mastercard</a>  He kicked into the ground and scooped up a handful of cool sand between his manacled hands and poured it over the remains of the eyes.  <a href="http://www.purevolume.com/t6wcorderinderal">cheap inderal online overnight</a> <a href="http://www.purevolume.com/xdjuorderlexapro">cheap lexapro online no prescription</a>  He closed the door softly and walked to his room with a full heart. <a href="http://www.purevolume.com/lpw1ordersuprax">cheap suprax in sweden</a> <a href="http://www.purevolume.com/9qkhordersporanox">order sporanox in denmark</a>  As inventions, we should regard them with simple abhorrence.
+
  http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/rpglovernightbiaxin">discount biaxin</a> <a href="http://www.purevolume.com/q0mobuyminocin">cheap minocin visa</a>  And, knowing the extent of his personal acquaintance with others, and of others with him, he compares his notoriety with that of the perfumery-girl, finds no great difference between them, and reaches at once the conclusion that she, in her walks, would be equally liable to recognition with himself in his.  <a href="http://www.purevolume.com/nwdgcheapminocin">order minocin no prescription</a> On the telephone to Boscombe Down, M had been brief and his voice had had an edge to it.  She was prostrated with shock, but is now fully recovered and is at her hotel<a href="http://www.purevolume.com/rsjbbuyalesse">order alesse in au</a>  <a href="http://www.purevolume.com/as2lorderarimidex">arimidex no prescription</a>  <a href="http://www.purevolume.com/wmh3overnightnizoral">nizoral in usa</a>
+
 
<a href="http://www.purevolume.com/ehyvbuyarcoxia">buy arcoxia visa</a> <a href="http://www.purevolume.com/jmeocheapseroquel">cheap seroquel in au</a>  In Russia the sexual climate is mid-Victorian.  <a href="http://www.purevolume.com/8zm4buywellbutrin">wellbutrin in it</a> <a href="http://www.purevolume.com/y9vgbuyvibramycin">order vibramycin online no prescription</a>  They stopped in the shadow of the mangrove tunnel and looked out.  <a href="http://www.purevolume.com/4928overnightsporanox">cheapest sporanox without a prescription</a> <a href="http://www.purevolume.com/omh5onlineelavil">cheap elavil pills</a>  They seemed to understand that I was looking after them.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/a2c1orderelavil">order elavil online no prescription</a> <a href="http://www.purevolume.com/7fm5orderpriligy">online purchase priligy</a>  He looked at the Greeks face.  <a href="http://www.purevolume.com/jv9kbuybuspar">buy buspar without prescription</a>  Bond cocked an eyebrow at Quarrel.   The water grew shallower and the bottom firmer<a href="http://www.purevolume.com/7fr1overnightsporanox">order sporanox in usa</a>  <a href="http://www.purevolume.com/dmfyorderbiaxin">biaxin in uk</a>  <a href="http://www.purevolume.com/osveonlineflomax">flomax in europe</a>
+
 
<a href="http://www.purevolume.com/zf6zonlinezovirax">zovirax online no prescription</a> <a href="http://www.purevolume.com/l4b6cheapperiactin">cheap periactin in gb</a>  He got to his bed and pulled himself on to it.  <a href="http://www.purevolume.com/43s8cheapalesse">alesse in denmark</a>  <a href="http://www.purevolume.com/ubhcorderarimidex">arimidex mastercard</a>  Guess I owe you a drink. <a href="http://www.purevolume.com/qje1cheapclomid">purchase clomid cheap</a>  <a href="http://www.purevolume.com/hw37onlinebuspar">buy buspar no prescription</a>  Takes all the Life out of them.
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/dii7onlinezovirax">buy zovirax in it</a>  <a href="http://www.purevolume.com/pa73onlinexenical">cheap xenical online overnight</a>  So sure as that God sits on high to watch over His children.   <a href="http://www.purevolume.com/n2n8cheapdiflucan">buy diflucan in germany</a> This was the last subject we discussed.  The man took Bonds four plaques and counted out the bills and Bond put them in his pocket and walked over to the reception desk.  <a href="http://www.purevolume.com/4wjaorderzovirax">cheap zovirax</a> <a href="http://www.purevolume.com/qb3iovernightalesse">buy alesse online no prescription</a>  <a href="http://www.purevolume.com/v10ybuylexapro">buy lexapro in europe</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/rt9sonlinecipro">cipro online no prescription</a> <a href="http://www.purevolume.com/l4lsovernightpropecia">cheap propecia</a>  Directly the cards were dealt I kicked myself.  <a href="http://www.purevolume.com/25g6ordernexium">cheap nexium visa</a> <a href="http://www.purevolume.com/ehsyordertenormin">tenormin cheap overnight delivery</a>  At one period I thought of cutting the corpse into minute fragments and destroying them by fire. <a href="http://www.purevolume.com/t9aibuydesogen">buy desogen in germany</a>  <a href="http://www.purevolume.com/ndhoonlinelipitor">lipitor 50 mg</a>  I knew than that to struggle at the moment against the Count was useless.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/ojqbovernightduphaston">order duphaston in uk</a> <a href="http://www.purevolume.com/vai0overnightglucophage">glucophage in germany</a>  We all seemed to find our spirits rise.   <a href="http://www.purevolume.com/w7izorderarcoxia">cheap arcoxia in sweden</a> But at length reflection came to my relief.   He put his pipe in his mouth and set a match to it. <a href="http://www.purevolume.com/j0xeonlinemotrin">order motrin in europe</a>  <a href="http://www.purevolume.com/yeoubuybactrim">buy bactrim in au</a>  <a href="http://www.purevolume.com/0v30buysynthroid">buy synthroid in gb</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
  # -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
  #   according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
  # -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#   (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#   to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
  # -Don't run the script from telnet and being connected through an IP connection at
 +
#   the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
  :foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
  # Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
  add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
:foreach i in [find comment=""] do={remove $i;}
 +
  :delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
  /ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
  add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 19:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari