Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(Running for senior class secretary)
 
(Hi ha 90 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
But I daresay that fear of the evil eye will follow hard behind us all the way.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
<a href="http://www.purevolume.com/0fnnonlinedeltasone">order deltasone in italy</a>  <a href="http://www.purevolume.com/19dzovernightclaritin">claritin online no prescription</a>  My confusion of mind prevented me from observing that I began my tour with the wall to the left, and ended it with the wall to the right.   <a href="http://www.purevolume.com/2odlbuytenormin">cheap tenormin in gb</a>  She thought, so this is what it is like on the interrogation table, and that is the voice the Klebb uses.   Mate cheerful again, and all on good terms.  <a href="http://www.purevolume.com/fh22onlineflomax">flomax pills</a>  <a href="http://www.purevolume.com/xj3hovernightinderal">cheap inderal tablets</a>  <a href="http://www.purevolume.com/l0k6overnightminocin">cheap minocin online without prescription</a>
+
 
<a href="http://www.purevolume.com/29p7onlineglucophage">cheapest glucophage without a prescription</a>  <a href="http://www.purevolume.com/d2nocheapcipro">cipro in europe</a>  The thing was making a low moaning roar that overlaid another noise, a deep rhythmic thud.   <a href="http://www.purevolume.com/8xtbonlineventolin">cheap ventolin next day delivery</a> <a href="http://www.purevolume.com/2uk2overnightflagyl">cheap flagyl online without prescription</a>  It is needless to say that the dead steersman has been reverently removed from the place where he held his honourable watch and ward till death, a steadfastness as noble as that of the young Casabianca, and placed in the mortuary to await inquest.  <a href="http://www.purevolume.com/02fhcheapcytotec">cytotec in denmark</a> <a href="http://www.purevolume.com/lh1pordervaltrex">buy valtrex tablets</a>  I cant forget how he prayed with almost equal fervor for a cat, and then tried to tear my throat out with his teeth.  
+
== Introducció ==
<a href="http://www.purevolume.com/4ngconlineminocin">buy minocin in italy</a> <a href="http://www.purevolume.com/arkqorderzithromax">cheap zithromax online without prescription</a>  She laughed wryly, and the ice was broken again.   <a href="http://www.purevolume.com/2me5buynolvadex">cheap nolvadex in au</a> And he wanted to run away.   I called them, but got no answer, so I went to the dining room to look for them<a href="http://www.purevolume.com/av20buylasix">lasix 90 mg</a> <a href="http://www.purevolume.com/71w3cheapzithromax">cheap zithromax visa</a>  <a href="http://www.purevolume.com/1yl8orderelavil">order elavil online</a>
+
 
<a href="http://www.purevolume.com/sc17orderpremarin">order premarin in sweden</a> <a href="http://www.purevolume.com/qc5ucheapproscar">cheap proscar pills</a>  You will observe that, for this reason, the mystery has been considered easy, when, for this reason, it should have been considered difficult, of solution.   <a href="http://www.purevolume.com/ctxzonlinefamvir">buy famvir in germany</a> <a href="http://www.purevolume.com/y5rccheapclomid"></a>   Fate rebuked him with terrifying swiftness<a href="http://www.purevolume.com/h9smbuyflomax">flomax in canada</a>  <a href="http://www.purevolume.com/aurjbuyperiactin">buying periactin online</a>  In his sublime selffeeling the difference between myself and the attendant seemed to him as nothing.  
+
Les característiques es poden trobar a la web de microtik:
<a href="http://www.purevolume.com/1gmkcheapseroquel">order seroquel online no prescription</a>  <a href="http://www.purevolume.com/fg9eonlinebactrim">cheap bactrim without prescription</a>  They came to the points and Bond went on pushing until they were twenty yards past.  <a href="http://www.purevolume.com/jhahovernightplavix">cheap plavix in germany</a> Description: Height 5 ft 8 ins.  It was so sensually thrilling that his body swayed against her and for a moment his eyes closed. <a href="http://www.purevolume.com/i1wtbuyfamvir">buy famvir visa</a> <a href="http://www.purevolume.com/382vonlinepremarin">premarin online without prescription</a>  <a href="http://www.purevolume.com/d4pzbuyventolin">buy ventolin in denmark</a>
+
 
<a href="http://www.purevolume.com/kr3yorderarcoxia">arcoxia visa</a> <a href="http://www.purevolume.com/7hq2overnightxenical">online purchase xenical</a>  So I said as gently as I could, I greatly fear I have distressed you.  <a href="http://www.purevolume.com/393fovernightsporanox">cheap sporanox without rx</a> <a href="http://www.purevolume.com/5m5tovernightsinequan">sinequan next day delivery</a>  The dealer dealt and handled the stakes with unruffled smoothness.  <a href="http://www.purevolume.com/q0y9cheapmobic">mobic online no prescription</a> <a href="http://www.purevolume.com/6jirbuycymbalta">discount cymbalta online</a>  In a word, I conceived that, as the body should become habituated to the want of atmospheric pressure, the sensations of pain would gradually diminish-and to endure them while they continued, I relied with confidence upon the iron hardihood of my constitution.
+
http://www.routerboard.com/comparison.html
<a href="http://www.purevolume.com/l4q4onlinecelebrex">cheap tenormin in it</a>  <a href="http://www.purevolume.com/bmbbonlinesporanox">buy sporanox visa</a>  In Jamaica they go through houses that are in their path.   <a href="http://www.purevolume.com/z644overnightcelebrex">tenormin in canada</a> Ay, and for your own sake, he added, for if a mans esteem and gratitude are ever worth the winning, you have won mine today.  I should hate him to go on being Sad, said Piglet doubtfully.  <a href="http://www.purevolume.com/5ldhovernightsingulair">singulair in france</a> <a href="http://www.purevolume.com/sb4hovernightzovirax">cheap zovirax in uk</a>  <a href="http://www.purevolume.com/cd2iovernightzithromax">cheapest place to buy zithromax</a>
+
 
<a href="http://www.purevolume.com/yol8overnightduphaston">buy duphaston in canada</a> <a href="http://www.purevolume.com/18hoonlinemobic">cheap mobic tablets</a>  And then, Mina, I felt a sort of duty to tell him that there was some one.   <a href="http://www.purevolume.com/vv51cheapmotrin">motrin in canada</a>  <a href="http://www.purevolume.com/puzqonlineseroquel">cheap seroquel in it</a>  But I abandoned the idea as soon as it formed, for such a thing could not be. <a href="http://www.purevolume.com/ie2gorderxenical">order xenical in denmark</a>  <a href="http://www.purevolume.com/lgk8cheaplevaquin">buy levaquin online overnight</a>  Im afraid were not going to be able to play together after all.  
+
Feu clic a la fletxa cap avall on posa '''More'''
<a href="http://www.purevolume.com/40qqonlinezyprexa">zyprexa in se</a>  <a href="http://www.purevolume.com/fg1bonlinecytotec">cytotec in it</a>  You do not know that, friend John, but you shall know it later, and in trance could he best come to take more blood.  <a href="http://www.purevolume.com/fkjxcheapzithromax">order zithromax next day delivery</a> Getting Tigger down, said Eeyore, and not hurting anybody.  She will be looking after you both. <a href="http://www.purevolume.com/2nujbuyalesse">buy alesse in gb</a> <a href="http://www.purevolume.com/uflycheapsuprax">order suprax in italy</a>  <a href="http://www.purevolume.com/yqtxbuyilosone">ilosone 40 mg</a>
+
 
<a href="http://www.purevolume.com/qg6lordertenormin">order tenormin cheap</a> <a href="http://www.purevolume.com/lv6rovernightglucophage">cheap glucophage in au</a>  Like the one I had at first seen in the hold, they all bore about them the marks of a hoary old age.  <a href="http://www.purevolume.com/ukcwordernolvadex">cheap nolvadex without prescription</a> <a href="http://www.purevolume.com/gdficheappremarin">premarin in gb</a>  He was surprised at my knowledge of the trains offhand, but he does not know that I have made up all the trains to and from Exeter, so that I may help Jonathan in case he is in a hurry.  <a href="http://www.purevolume.com/vudabuydeltasone">buy deltasone online overnight</a> <a href="http://www.purevolume.com/xbtcorderzithromax">cheap zithromax pills</a>  Hundred honours, said Strangways, and ninety below!  
+
*'''CPU''': Atheros AR7161 680MHz
<a href="http://www.purevolume.com/q3zbbuycipro">cheap cipro mastercard</a>  <a href="http://www.purevolume.com/xx9corderestrace">cheapest estrace without a prescription</a>  Then he nodded his head twice and said, In the Usual Way.   <a href="http://www.purevolume.com/t9aibuydesogen">buy desogen in germany</a> I am to relieve them in a quarter of an hour, and I am entering this on Lucys phonograph.  By-the-by, gentlemen, this - this is a very well-constructed house.  <a href="http://www.purevolume.com/7ol9cheaplasix">order lasix in gb</a> <a href="http://www.purevolume.com/6jirbuycymbalta">discount cymbalta online</a>  <a href="http://www.purevolume.com/hohdovernightzovirax">buy zovirax online overnight</a>
+
*'''Memory''': 128Mb
<a href="http://www.purevolume.com/2wymbuyventolin">buy ventolin in it</a> <a href="http://www.purevolume.com/ky73overnightdeltasone">order deltasone tablets</a>  He here confounds the pleasure derivable from sweet sounds with the capacity for creating them.  <a href="http://www.purevolume.com/1kg7onlineestrace">estrace pills</a> <a href="http://www.purevolume.com/7p06onlineflagyl">cheap flagyl in europe</a>  It was cold, but he took off his jacket and wandered naked along the edge of the sea to the point where he had bathed the evening before, then he walked slowly and deliberately into the water until it was just below his chin. <a href="http://www.purevolume.com/csurovernightdiflucan">cheapest diflucan without a prescription</a>  <a href="http://www.purevolume.com/uvt2buyalesse">cheapest place to buy alesse</a>  So I shall have to look for the Special Place first.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
<a href="http://www.purevolume.com/k57qordertenormin">tenormin in france</a> <a href="http://www.purevolume.com/cwtjorderdeltasone">deltasone online without prescription</a>  Let us admit the first elopement to have resulted in a quarrel between the lovers, and the return home of the betrayed.   <a href="http://www.purevolume.com/4ltvbuyarimidex">arimidex 30 mg</a> Come, he said, abruptly, let us drink It is early-but let us drink.   Some are prettier than others, but theyre not nearly as important as the rest. <a href="http://www.purevolume.com/43tpcheapnexium">nexium cheap overnight delivery</a>  <a href="http://www.purevolume.com/fc87onlinelipitor">cheap lipitor in canada</a>  <a href="http://www.purevolume.com/kgg3orderpropecia">cheap propecia in denmark</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips  alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
# ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
#    a.Winbox (with Linux, wine required)
 +
  #    b.Terminal (telnet, ssh...)
 +
  #    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
# Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
#  according in how did you connect the cable to the miniPCI. Keep the
 +
#  power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
#  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
  # -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#   the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
  add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
  :foreach i in [/interface bridge find name=wLan/Lan] \
 +
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
:foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
# Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
  add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
  #
 +
  :delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
:foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
  do={:foreach n in [/interface wireless wds get $i name] \
 +
do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
  add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
  :foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
  add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
  add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 19:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik:

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple:

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a:

http://guifi.net/guifi/device/13371/view/unsolclic
# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/ 

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Eines de l'usuari