Mikrotik RouterBoard 433: Diferència entre les revisions

De Guifi.net - Wiki Català

(forever 21 online application)
 
(Hi ha 33 revisions intermèdies sense mostrar fetes per un usuari)
Línia 1: Línia 1:
−
As she spoke I could see her husbands face darken and draw together, as though the passion in him were shriveling his being to its core.  
+
[[Imatge:Routerboard433AH.png|thumb|Placa Routerboard RB433AH]]
−
<a href="http://www.purevolume.com/yf7rovernightdiflucan">buy diflucan online australia</a>  <a href="http://www.purevolume.com/p3w4onlinevaltrex">how to take 500 mg valtrex</a>  He slipped his feet into a pair of dark?  <a href="http://www.purevolume.com/rzdaovernightlasix">lasix furosemide order</a>  He cannot go back, and maybe could not proceed at all if once he lost the thread of his thought.   And yet what a dear little puppy it was!  <a href="http://www.purevolume.com/zldiovernightelavil">buy elavil online uk</a>  <a href="http://www.purevolume.com/6rtjorderwellbutrin">cheapest wellbutrin without a prescription</a>  <a href="http://www.purevolume.com/98xyorderalesse">how much does alesse cost at shoppers</a>
+
 
−
<a href="http://www.purevolume.com/wk3bonlinezithromax">buy zithromax 250 mg</a> <a href="http://www.purevolume.com/558uovernightcelebrex">celebrex costochondritis</a>  He longed to break it up with his own hands-to wind his silk napkin round Doctor Nos throat and squeeze until the contact lenses popped out of the black, damnable eyes.   <a href="http://www.purevolume.com/5sckonlinesinequan">purchase sinequan cheap</a>  <a href="http://www.purevolume.com/wtd6onlinebiaxin">biaxin xl pac</a>  But she was humble and obedient, and sat meekly for many weeks in the dark, high turret-chamber where the light dripped upon the pale canvas only from overhead.  <a href="http://www.purevolume.com/f4pnonlinebuspar">buspar 60 mg per day</a> <a href="http://www.purevolume.com/kg8cbuycipro">cost ciprodex</a>  At the last moment there was need to hurry.
+
== Introducció ==
−
<a href="http://www.purevolume.com/8ip2orderclomid">buy clomid pct uk</a> <a href="http://www.purevolume.com/bp2zonlineclomid">bought clomid online get pregnant</a>  I do believe that if he had not had me to lean on and to support him he would have sunk down.   <a href="http://www.purevolume.com/oc0gbuylexapro">lexapro overdose 100 mg</a> With her hand on the knob of the open door, she turned and looked at him, and the sultry glow was back in her eyes.  So they began solemnly dancing round and round Alice, every now and then treading on her toes when they passed too close, and waving their forepaws to mark the time, while the Mock Turtle sang this, very slowly and sadly:- Will you walk a little faster? <a href="http://www.purevolume.com/o44lcheapilosone">buy ilosone online australia</a> <a href="http://www.purevolume.com/axhiorderzyprexa">zyprexa pharmacy</a>  <a href="http://www.purevolume.com/vzr7onlineflomax">buy flomax online without prescription</a>
+
 
−
<a href="http://www.purevolume.com/0wkuonlinelevaquin">levaquin generic cost</a> <a href="http://www.purevolume.com/hnm0onlinealesse">alesse birth control online</a>  Further and further back he cowered, as we, lifting our crucifixes, advanced.   <a href="http://www.purevolume.com/u709cheappriligy">priligy price uk</a> <a href="http://www.purevolume.com/w8k2cheapcipro">what is ic ciprofloxacin hcl 500mg used for</a>  We looked at each other, and together moved out into the hall.  <a href="http://www.purevolume.com/jtsmcheapzithromax">zithromax side effects</a> <a href="http://www.purevolume.com/w9orbuykamagra">buy kamagra in new zealand</a>  It is most unfortunate for you that we didnt find the cheque.  
+
Les característiques es poden trobar a la web de microtik:
−
<a href="http://www.purevolume.com/la6wbuynexium">nexium price philippines</a> <a href="http://www.purevolume.com/p1wdorderamoxil">buy amoxil 500 mg</a>   Bond went down on his hands and did twenty slow press-ups, lingering over each one so that his muscles had no rest.   <a href="http://www.purevolume.com/4cqjcheapbiaxin">what is biaxin filmtab 500 mg used for</a> At length my eyes, in going the circuit of the room, fell upon a trumpery fillagree card-rack of pasteboard, that hung dangling by a dirty blue ribbon, from a little brass knob just beneath the middle of the mantel-piece.   I remember, though I suppose I was asleep, passing through the streets and over the bridge.  <a href="http://www.purevolume.com/qwk7cheapnizoral">where can i buy nizoral shampoo</a>  <a href="http://www.purevolume.com/gmh5buytopamax">how to buy topamax in canada</a>  <a href="http://www.purevolume.com/ky92overnightstrattera">buy on line strattera cheap</a>
+
 
−
<a href="http://www.purevolume.com/77gcbuyamoxil">buy amoxil online no prescription</a> <a href="http://www.purevolume.com/7uk1onlineadvair">cheapest advair diskus</a>  At length it became evident that a slight, a very feeble, and barely noticeable tinge of color had flushed up within the cheeks, and along the sunken small veins of the eyelids.  <a href="http://www.purevolume.com/fw9oonlinewellbutrin">wellbutrin paypal</a> <a href="http://www.purevolume.com/xjw1overnightflomax">buy flomax</a>  This morning I am horribly weak. <a href="http://www.purevolume.com/heiwonlinelasix">lasix 40 mg iv stat</a> <a href="http://www.purevolume.com/zczwovernightminocin">buy minocin no prescription</a>  Its all my fault, she dabbed at her eyes.
+
http://www.routerboard.com/comparison.html
−
<a href="http://www.purevolume.com/k7ckordersuprax">suprax for gonorrhea</a> <a href="http://www.purevolume.com/hodjonlinecymbalta">cymbalta 30 mg capsule msr</a>  I must go and get ready to play croquet with the Queen, and she hurried out of the room.  <a href="http://www.purevolume.com/ky59overnightlasix">250 mg lasix</a> Slowly the body rose to the surface and lay, head down, softly rocking in the ripples of the dive.  Cant you hear, or do you think you have more education than Christopher Robin?  <a href="http://www.purevolume.com/hcxronlineseroquel">seroquel xr 300 mg bipolar</a> <a href="http://www.purevolume.com/f552overnightadvair">advair coupon</a>  <a href="http://www.purevolume.com/o9i9overnightseroquel">cheap seroquel online</a>
+
 
−
<a href="http://www.purevolume.com/jz7xovernightplavix">plavix on line without prescription</a>  <a href="http://www.purevolume.com/lsegovernightarcoxia">arcoxia 90 mg tabletas</a>  I assure you, my dear sirs, I am rejoiced at the result, perfectly rejoiced.   <a href="http://www.purevolume.com/otaionlineadvair">advair discount coupon</a> <a href="http://www.purevolume.com/mteobuydiflucan">diflucan sale diflucan overnight</a>  When Mathis came to see him three days later he was propped up in bed and his arms were free. <a href="http://www.purevolume.com/mjihonlinelevaquin">cheapest levaquin without a prescription</a> <a href="http://www.purevolume.com/kv0uonlinebuspar">buspar buy</a>  He said to Renfield in a tone which did not surprise me at the time, but only when I thought of it afterwards, for it was as of one addressing an equal, Can you not tell frankly your real reason for wishing to be free tonight?
+
Feu clic a la fletxa cap avall on posa '''More'''
−
<a href="http://www.purevolume.com/ap44overnightzovirax">zovirax price usa</a> <a href="http://www.purevolume.com/zmf9onlineduphaston">for sale duphaston</a>  So I shall get up and ask him not to do it.   <a href="http://www.purevolume.com/sfneorderpremarin">mail order premarin</a> Just the sort of mares nest these old womens societies are always stirring up.  That other of his race who, in a later age, again and again, brought his forces over The Great River into Turkey Land, who when he was beaten back, came again, and again, and again, though he had to come alone from the bloody field where his troops were being slaughtered, since he knew that he alone could ultimately triumph.  <a href="http://www.purevolume.com/rrtbcheaplexapro">order generic lexapro online</a> <a href="http://www.purevolume.com/48fvcheappropecia">can you buy propecia in australia</a>  <a href="http://www.purevolume.com/bo2jorderkamagra">buy kamagra singapore</a>
+
 
−
<a href="http://www.purevolume.com/u4n7overnightflomax">flomax 02 mg</a>  <a href="http://www.purevolume.com/5842buylipitor">cheap lipitor</a>  The golden body blazed in the white tiled bathroom.   <a href="http://www.purevolume.com/46wjovernightwellbutrin">wellbutrin sr mg</a> <a href="http://www.purevolume.com/9vu9ordervaltrex">where can i buy valtrex online</a>  Presently the horses began to scream, and tore at their tethers till I came to them and quieted them.  <a href="http://www.purevolume.com/spjiovernightsynthroid">synthroid price comparison</a> <a href="http://www.purevolume.com/mckncheapcymbalta">taking 90 mg cymbalta</a>  It had cut through the linen beneath.
+
*'''CPU''': Atheros AR7161 680MHz
−
<a href="http://www.purevolume.com/lhkrbuyvibramycin">order vibramycin without prescription</a> <a href="http://www.purevolume.com/45ctcheapadvair">buy advair diskus in canada</a>  A breeze, the first soft breeze of early morning, whispered across the metal surface of the inlet.  <a href="http://www.purevolume.com/mzquonlinesynthroid">buy synthroid online australia</a> Read the lies on that thruff-stone, he said.  As soon as Rabbit was out of sight, Pooh remembered that he had forgotten to ask who Small was, and whether he was the sort of friend-and-relation who settled on ones nose, or the sort who got trodden on by mistake, and as it was Too Late Now, he thought he would begin the Hunt by looking for Piglet, and asking him what they were looking for before he looked for it.  <a href="http://www.purevolume.com/o732overnightclaritin">claritin paypal</a> <a href="http://www.purevolume.com/ieayovernighttopamax">average price of topamax</a>  <a href="http://www.purevolume.com/l3nsonlinenizoral">nizoral 40mg</a>
+
*'''Memory''': 128Mb
−
<a href="http://www.purevolume.com/42j7orderelavil">cost of elavil</a>  <a href="http://www.purevolume.com/ovfgonlinenizoral">buy nizoral shampoo 2</a>  Not at first, perhaps, said the Hatter: but you could keep it to half-past one as long as you liked.   <a href="http://www.purevolume.com/h0xqcheaplexapro">what does lexapro cost at walmart</a> <a href="http://www.purevolume.com/ykcvcheaptopamax">purchase topamax</a>  The figure stopped, and at the moment a ray of moonlight fell upon the masses of driving clouds, and showed in startling prominence a dark-haired woman, dressed in the cerements of the grave.  <a href="http://www.purevolume.com/rjq9cheaptenormin">cheapest place to buy tenormin</a> <a href="http://www.purevolume.com/gazabuykamagra">kamagra gel oral 50 mg</a>  The red seemed to have gone even from her lips and gums, and the bones of her face stood out prominently.  
+
*'''Ports Ethernet'''': 3 de 10/100mbps
−
<a href="http://www.purevolume.com/oqblorderstrattera">30 mg strattera</a> <a href="http://www.purevolume.com/im9tbuypriligy">6drugs host buy priligy</a>  The coastguard ran aft, and when he came beside the wheel, bent over to examine it, and recoiled at once as though under some sudden emotion.   <a href="http://www.purevolume.com/hzobovernightproscar">cheapest proscar online</a> The simple Cuban and Jamaican labourer was earning ten shillings a week cutting cane.   The young curate came in, however, and Mrs. <a href="http://www.purevolume.com/nw8tcheaptopamax">cost topamax without insurance</a>  <a href="http://www.purevolume.com/xn2ocheapnexium">nexium 40 mg tablet astrazeneca</a>  <a href="http://www.purevolume.com/kmv8cheapduphaston">price of duphaston</a>
+
*'''Expansió''': 3 ràdios miniPCI
 +
*'''Alimentació per Power Jack''': De 10 a 28V DC; Té una protecció contra excés de voltatge
 +
*'''Alimentació per PoE''': De 10 a 28V DC;
 +
*'''Firmware''': RouterOS Level5
 +
 
 +
Al mateix web podeu accedir als següents documents:
 +
 
 +
*[http://www.routerboard.com/pdf/rb433ah.pdf Brochure]
 +
*[http://www.routerboard.com/pdf/rb433mA.pdf Startup guide]
 +
*[http://www.routerboard.com/pdf/rb433ugA.pdf Users Guide]
 +
 
 +
=== Encendre la Routerboard (Boot) ===
 +
 
 +
Hi han 2 formes de fer arribar la alimentació a la placa:
 +
 
 +
*Mitjançant l'alimentador
 +
*Mitjançant [[PoE]]
 +
 
 +
*Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
 +
*Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.
 +
 
 +
Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.
 +
 
 +
=== Winbox ===
 +
 
 +
Consulteu l'article [[Winbox]].
 +
 
 +
== Con connectar-se al dispositiu ==
 +
 
 +
Consulteu la secció [[Winbox#Connexi.C3.B3_a_un_dispositiu| Connexió a un dispositiu]] de l'article [[Winbox]].
 +
 
 +
= Configuració per a guifi.net =
 +
 
 +
Primer cal afegir un node a la web de [http://www.guifi.net guifi.net]. Consulteu l'article [[Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic]] per conèixer els detalls.
 +
 
 +
== Configuració de la routerboard amb unsolclic ==
 +
 
 +
Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat '''Trastos'''. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.
 +
 
 +
Per exemple:
 +
 
 +
  http://guifi.net/node/13502
 +
 
 +
Ha de ser quelcom similar al que trobareu a:
 +
 
 +
  http://guifi.net/guifi/device/13371/view/unsolclic
 +
 
 +
  # Generat per a:  
 +
# RouterOSv3.x
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
 +
#
 +
# Configuration for RouterOS > 2.9.51 or 3.x
 +
  # Trasto: 13371-TRSIESCopernicRd1
 +
#
 +
  # ATENCIÓ: Versió Beta
 +
#
 +
# Methods to upload/execute this script:
 +
# 1.-As a script. Upload this output as a script either with:
 +
  #    a.Winbox (with Linux, wine required)
 +
#    b.Terminal (telnet, ssh...)
 +
#    Then execute the script with:
 +
#      > /system script run script_name
 +
# 2.-Fitxer importat:
 +
#    Desa aquesta "sortida" a un fitxer, després puja'l al router
 +
  #    fent servir FTP amb un nom de l'estil "script_name.rsc".
 +
#    (note, l'extensió ".rsc" es un requisit)
 +
#    Executa el fitxer importat amb la comanda:
 +
#      > /import script_name
 +
  # 3.-Telnet copia i enganxar:
 +
#    Open a terminal session, and cut&paste this output
 +
#    directly on the terminal input.
 +
#
 +
  # Notes:
 +
# -routing-test package is required, be sure you have it enabled at system packages
 +
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
 +
  #  according in how did you connect the cable to the miniPCI. Keep the
 +
  #   power at the minimum possible and check the channel.
 +
# -The script doesn't reset the router, you might have to do it manually
 +
# -You must have write access to the router
 +
# -MAC access (winbox, MAC telnet...) method is recommended
 +
  #  (the script reconfigures some IP addresses, so communication can be lost)
 +
# -No changes are done in user passwords on the device
 +
# -A Read Only guest account with no password will be created to allow guest access
 +
#  to the router with no danger of damage but able to see the config.
 +
# -Be sure that all packages are activated.
 +
# -Don't run the script from telnet and being connected through an IP connection at
 +
#  the wLan/Lan interface: This interface will be destroyed during the script.
 +
  #
 +
/ system identity set name=TRSIESCopernicRd1
 +
#
 +
# DNS (client & server cache) zone: 8802
 +
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
 +
:delay 1
 +
#
 +
# NTP (client & server cache) zone: 8802
 +
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
 +
:delay 1
 +
#
 +
# Bandwidth-server
 +
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
 +
#
 +
# SNMP
 +
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
 +
#
 +
# Guest user
 +
/user
 +
  :foreach i in [find group=read] do={/user remove $i;}
 +
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
 +
#
 +
# Graphing
 +
/tool graphing interface add
 +
# Remove current wLan/Lan bridge if exists
 +
:foreach i in [/interface bridge find name=wLan/Lan] \
 +
  do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
 +
do={/interface bridge port remove $i; \
 +
  :foreach i in [/ip address find interface=wLan/Lan] \
 +
do={/ip address remove $i;};};
 +
/interface bridge remove $i;}
 +
  # Construct main bridge on wlan1 & ether1
 +
/ interface bridge
 +
add name="wLan/Lan"
 +
/ interface bridge port
 +
add interface=ether1 bridge=wLan/Lan
 +
add interface=wlan1 bridge=wLan/Lan
 +
:delay 1
 +
#
 +
# Radio#: 0 TRSACprncRd1AP0
 +
/interface wireless set wlan1 name="wlan1" \
 +
  radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
 +
  band="2.4ghz-b" \
 +
  frequency-mode=manual-txpower country=spain antenna-gain=0 \
 +
dfs-mode=radar-detect \
 +
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
 +
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
 +
:delay 1
 +
# Type: wLan/Lan
 +
/ip address
 +
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
 +
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
 +
/ routing ospf interface
 +
  :foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
 +
  add interface=wLan/Lan
 +
/ routing ospf network
 +
  :foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
 +
add network=10.139.60.32/27 area=backbone disabled=no
 +
  :delay 1
 +
  #
 +
# DHCP
 +
/ip dhcp-server lease
 +
  :foreach i in [find comment=""] do={remove $i;}
 +
:delay 1
 +
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
 +
  :foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
 +
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
 +
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
 +
  :foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
 +
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
 +
#
 +
:delay 1
 +
# Type: wds/p2p
 +
# Remove all existing wds interfaces
 +
  :foreach i in [/interface wireless wds find master-interface=wlan1] \
 +
do={:foreach n in [/interface wireless wds get $i name] \
 +
  do={:foreach inum in [/ip address find interface=$n] \
 +
do={/ip address remove $inum;};}; \
 +
/interface wireless wds remove $i;}
 +
#
 +
:delay 1
 +
#
 +
# Routed device
 +
#
 +
# Altres connexions de cable
 +
#
 +
# Internal addresses NAT
 +
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
 +
  :foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
 +
  /ip firewall nat
 +
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
 +
#
 +
# Enrutament BGP
 +
# Filtres BGP i OSPF
 +
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
 +
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
 +
/ routing filter
 +
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
  add chain=ospf-out invert-match=no action=discard comment="" disabled=no
 +
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
 +
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
 +
#
 +
# Instància BGP
 +
/ routing bgp instance
 +
  set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
 +
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
 +
  redistribute-other-bgp=yes out-filter=ospf-out \
 +
client-to-client-reflection=yes comment="" disabled=no
 +
#
 +
# Enrutament OSPF
 +
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1
 +
#
 +
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
 +
/  
 +
   
 +
Per aplicar els canvis heu d'utilitzar [[Winbox]] per [[Winbox#Connexi.C3.B3_a_un_dispositiu| connectar-vos al dispositiu]]. Si és el primer cop haureu [[Winbox#Instal.C2.B7laci.C3.B3_i_execuci.C3.B3 | instal·lar Winbox]]. Un cop connectats aneu a l'apartat '''New Terminal''':
 +
 
 +
[[Imatge:RouterBoardGuifi.png]]
 +
 
 +
Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.
 +
 
 +
= Upgrade del routerOS=
 +
 
 +
*http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
 +
 
 +
= Resolució de problemes. Preguntes més freqüents. Troubleshooting =
 +
 
 +
=== Com saber la MAC d'una microtik? ===
 +
 
 +
Cal consultar-la des de winbox a l'apartat interfaces.
 +
 
 +
==== Targetes WIFI miniPCI ====
 +
 
 +
Es pot consultar la MAC a la pròpia placa en una enganxina que porta.
 +
 
 +
==== La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster ====
 +
No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.
 +
 
 +
--[[Usuari:Pablog|Pablog]] 21:10, 18 gen 2011 (UTC)
 +
 
 +
== Recursos ==
 +
 
 +
[[categoria:router]]

Revisió de 19:02, 16 gen 2014

Fitxer:Routerboard433AH.png
Placa Routerboard RB433AH

Introducció

Les característiques es poden trobar a la web de microtik: 

http://www.routerboard.com/comparison.html

Feu clic a la fletxa cap avall on posa More

  • CPU: Atheros AR7161 680MHz
  • Memory: 128Mb
  • Ports Ethernet': 3 de 10/100mbps
  • Expansió: 3 ràdios miniPCI
  • Alimentació per Power Jack: De 10 a 28V DC; Té una protecció contra excés de voltatge
  • Alimentació per PoE: De 10 a 28V DC;
  • Firmware: RouterOS Level5

Al mateix web podeu accedir als següents documents:

Encendre la Routerboard (Boot)

Hi han 2 formes de fer arribar la alimentació a la placa:

  • Mitjançant l'alimentador
  • Mitjançant PoE
  • Abans de fer un primer bip, parpellegin les llums de link i d'activitat de les connexions Ethernet RJ-45 de la placa.
  • Fa un primer bip (o pip), i al cap d'una estona, per indicar que ja està iniciat el firmware, farà dos bips alhora que parpellegen les senyals de link.

Quan la placa rep alimentació s'encén el LED blau. Per apagar, hem de desconnectar el cable d'alimentació o el cable POE.

Winbox

Consulteu l'article Winbox.

Con connectar-se al dispositiu

Consulteu la secció Connexió a un dispositiu de l'article Winbox.

Configuració per a guifi.net

Primer cal afegir un node a la web de guifi.net. Consulteu l'article Exemple_pas_a_pas_de_muntatge_d'un_node_a_l'IES_Nicolau_Copèrnic per conèixer els detalls.

Configuració de la routerboard amb unsolclic

Un cop tenim el node, els trastos i la radio i els enllaços creats, podem obtenir la configuració d'unsolclic. Trobareu una opció de menú al vostre node. Aneu a l'apartat Trastos. Trobareu un enllaç al unsolclic de cada trasto a la columna unsolclic.

Per exemple: 

http://guifi.net/node/13502

Ha de ser quelcom similar al que trobareu a: 

http://guifi.net/guifi/device/13371/view/unsolclic

# Generat per a: 
# RouterOSv3.x
:log info "Unsolclic for 13371-TRSIESCopernicRd1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 13371-TRSIESCopernicRd1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TRSIESCopernicRd1
#
# DNS (client & server cache) zone: 8802
/ip dns set primary-dns=10.139.7.162 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 8802
/system ntp client set enabled=yes mode=unicast primary-ntp=10.139.7.162
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="TRSIESCopernic"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TRSACprncRd1AP0
/interface wireless set wlan1 name="wlan1" \
radio-name="TRSACprncRd1AP0" mode=ap-bridge ssid="guifi.net-TRSACprncRd1AP0" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
dfs-mode=radar-detect \
antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.139.60.33/27"] do={remove $i}
/ ip address add address=10.139.60.33/27 network=10.139.60.32 broadcast=10.139.60.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.139.60.32/27] do={/routing ospf network remove $i;}
add network=10.139.60.32/27 area=backbone disabled=no
  :delay 1
 #
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.139.60.34 mac-address=00:15:6D:AD:70:EF client-id=TRSCEIPMariaGaliRd1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.139.60.32/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.139.60.40-10.139.60.62
/ip dhcp-server network add address=10.139.60.32/27 gateway=10.139.60.33 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.139.60.33 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=13371 router-id=10.139.60.33 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.139.60.33 distribute-default=never redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute- bgp=as-type-1 
#
:log info "Unsolclic for 13371-TRSIESCopernicRd1 executed."
/

Per aplicar els canvis heu d'utilitzar Winbox per connectar-vos al dispositiu. Si és el primer cop haureu instal·lar Winbox. Un cop connectats aneu a l'apartat New Terminal:

Fitxer:RouterBoardGuifi.png

Aquí heu d'enganxar directament (amb les opcions copiar i enganxar del menú contextual del botó dret) la configuració d'unsolclic.

Upgrade del routerOS

Resolució de problemes. Preguntes més freqüents. Troubleshooting

Com saber la MAC d'una microtik?

Cal consultar-la des de winbox a l'apartat interfaces.

Targetes WIFI miniPCI

Es pot consultar la MAC a la pròpia placa en una enganxina que porta.

La ràdio pot escanejar xarxes però després no apareix el SSID en mode màster

No sé ben bé com ho solucionem, el que vam fer va ser canviar l'única ràdio de la ranura 2 a la 1, reiniciar i esperar.

--Pablog 21:10, 18 gen 2011 (UTC)

Recursos

Obtingut de «http://ca.wiki.guifi.net/w/index.php?title=Mikrotik_RouterBoard_433&oldid=3733»
Eines de l'usuari